Study Guide Instructor view

How Computers Count in Binary

Teaching notes for Lesson 1.1, with controls for presenting it.

Keep this page on your own screen. Share only the lesson window. The lesson window holds no teaching notes, so sharing it cannot show them.

Presenting

  1. Open the lesson in its own window and share that window, not this one.
  2. Use Next and Previous here, or the lesson’s own, to move through the lesson. Next reveals one thing at a time: the next idea, or the answer to the question on screen, then the next step. Previous takes the last reveal back. The line below says what is on screen and what Next will show.
  3. Reveal hints and answers when the class is ready, and reset a demonstration before using it again.

The controls need JavaScript and a browser that supports BroadcastChannel. Without them, open the lesson in presentation mode and use its own controls.

The two windows talk to each other only inside this browser, on this device. Nothing is sent to a server, and no account is needed. A second device (a phone or another tablet) cannot follow the lesson window yet.

Lesson plan

Level
Beginner
Time
About 50 minutes; the steps below add up to 50

Pupils discover that each extra bit doubles the number of patterns, then use place value to read and write binary numbers up to eight bits. The lesson ends with the misconception that binary 10 is ten.

Objectives

  • Explain why computers store data using two states
  • Work out how many different patterns a given number of bits can make
  • Convert a binary number of up to eight bits to denary using place value
  • Convert a denary number up to 255 to an 8-bit binary number
  • Explain why binary 10 does not mean ten

Before the lesson

  • Have three classroom light switches, three cards (one side 0, one side 1) or three volunteers with hands up or down, so the class can see every arrangement.
  • Open the whiteboard (W in presentation mode) before the lesson and write the column headings 128 to 1 on page 1, ready for the conversions.

Steps

  1. Introduction Opening

    On screen: the lesson’s title, module and number; Next adds its objectives and key terms, as the lesson page lists them; Next again begins the first step.

    Objectives on screen

    • Explain why computers store data using two states
    • Work out how many different patterns a given number of bits can make
    • Convert a binary number of up to eight bits to denary using place value
    • Convert a denary number up to 255 to an 8-bit binary number
    • Explain why binary 10 does not mean ten

    Purpose: Pupils discover that each extra bit doubles the number of patterns, then use place value to read and write binary numbers up to eight bits. The lesson ends with the misconception that binary 10 is ten.

  2. 1. Three light switches Think 5 min

    Purpose: Commit to a prediction before any idea is named.

    Ask

    • Guess first: how many messages can three switches send?
    • How did you get your answer?

    Responses to expect

    • 3, one per switch
    • 6, from 3 × 2
    • 8, from listing

    Misconceptions to challenge

    • A learner may believe: “Three switches can only send three messages.” Respond: Ask what one switch can do on its own (two messages) and build up from there.

    On the board or with the pen

    • Write the class’s guesses on the board and leave them up until step 2 answers them.

    Discussion pause: Ask pupils to say their guess to a partner before anyone shares.

    In the lesson window

    • Think it through: Before working anything out, guess: how many different messages could three switches send?
  3. 2. Every switch doubles the patterns Discover 7 min

    Purpose: Discover the doubling rule by building the arrangements one switch at a time.

    Ask

    • What happens to every arrangement when we add a switch?
    • What if What if we had ten switches?

    Responses to expect

    • It appears twice: with the new switch off and on.
    • 1,024 for ten switches

    Misconceptions to challenge

    • A learner may believe: “Each extra switch adds a fixed number of arrangements.” Respond: Put 2, 4 and 8 side by side and ask what you multiply by each time.

    On the board or with the pen

    • With the pen, draw a branching tree: one switch splits into 0 and 1, each splits again; count the ends.

    In the lesson window

    • Check your understanding: How many different arrangements can four switches make?
  4. 3. Why a computer uses two states Explain 5 min

    Purpose: Connect the switches to transistors, and name bit, binary and byte.

    Ask

    • Why might two states be more reliable than ten?
    • How many patterns can one byte hold? (the check question)

    Responses to expect

    • It is easier to tell on from off than one of ten levels.
    • Less chance of a mistake
    • 256; watch for 8 (one per bit) and 16 (8 × 2), which both mean the doubling rule has not yet been applied

    Misconceptions to challenge

    • A learner may believe: “Computers use binary because people chose it to be hard.” Respond: Stress reliability: two clearly different states survive noise; ten close levels do not.

    In the lesson window

    • Check your understanding: How many different patterns can one byte hold?
  5. 4. Reading a binary number Explain 9 min

    Purpose: Read binary by place value, using denary place value as the bridge.

    Ask

    • What is the 2 in 325 worth? Why?
    • What does each binary column do to the one before it?

    Responses to expect

    • Twenty, because it is in the tens column
    • Doubles

    Misconceptions to challenge

    • A learner may believe: “Counting the 1s gives the value.” Respond: Show 10000000 and 00000111: one 1 against three, yet 128 against 7.

    On the board or with the pen

    • Write 01100100 under the column headings on the whiteboard, circle each 1 and add the circled place values beneath.

    If the explanation does not land: Use coins: a row of 1p, 2p, 4p, 8p coins, each either on the table or not.

    In the lesson window

    • Check your understanding: What is the binary number 01100100 in denary?
    • Bit switches
  6. 5. Going the other way: denary to binary Discover 9 min

    Purpose: Write a denary number in binary by repeatedly taking the largest place value that fits.

    Ask

    • Which is the biggest place value that fits into 90?
    • How can you check your answer?

    Responses to expect

    • 64
    • Read it back by adding the place values

    Misconceptions to challenge

    • A learner may believe: “You convert each denary digit separately (3 and 7 for 37).” Respond: Read the result back: 0011 0111 is 55, not 37. The number is converted as a whole.

    On the board or with the pen

    • Write 90 at the top of a fresh whiteboard page and subtract down the page, one place value per line, writing each bit as you go.

    To go further

    • What if What if you had only 6 bits: what is the largest number you could write?

    In the lesson window

    • Think it through: Using the place values 128, 64, 32, 16, 8, 4, 2 and 1, each at most once, how could you make 90?
    • Check your understanding: Which 8-bit binary number is 37 in denary?
  7. 6. When 10 does not mean ten Discover 5 min

    Purpose: Challenge the misreading of binary numerals as denary.

    Ask

    • What does 10 mean in binary? And 100?

    Responses to expect

    • Two
    • Four

    Misconceptions to challenge

    • A learner may believe: “Binary 10 is ten.” Respond: Point at the columns: the 1 is in the 2 column, so it is worth two.

    In the lesson window

    • Think it through: Someone says: “In binary, 10 means ten.” Using the column values, what does binary 10 really mean?
  8. 7. Use it somewhere new Apply 5 min

    Purpose: Apply place value with a different number of bits.

    Ask

    • How many lockers could five lights number?

    Responses to expect

    • 32 (0 to 31)

    Misconceptions to challenge

    • A learner may believe: “The highest locker number is 32.” Respond: One pattern, 00000, means 0, so the numbers run 0 to 31.

    In the lesson window

    • Apply it: A locker’s panel shows 10011. Which locker is it?
  9. 8. Bring it together Consolidate 5 min

    Purpose: Retrieval without notes, and a quick check of the conversion both ways.

    Ask

    • Explain to your partner why three bits give eight values.
    • What is the largest value six bits can send? (the closing check)

    Responses to expect

    • Each bit doubles the patterns: 2 × 2 × 2
    • 63; anyone answering 64 has counted the patterns but forgotten that 000000 is zero

    In the lesson window

    • Think it through: Without looking back, explain in two sentences why three bits can store eight different values, and how you would write 6 in 3-bit binary.
    • Check your understanding: A sensor sends its readings as 6-bit binary numbers. What is the largest value it can send?
  10. Lesson recap Closing

    On screen: the lesson’s objectives again; Next adds the closing question, which asks the class to explain each one in their own words without looking back. It says nothing about what anyone has learnt: use the answers to decide what to revisit.

    Points to listen for

    • Each extra bit doubles the number of patterns.
    • Binary columns are worth 1, 2, 4, 8, … doubling to the left.
    • Read by adding the place values of the 1s; write by taking the largest place value that fits.
    • Binary 10 means two.

Consolidation

  • Each extra bit doubles the number of patterns.
  • Binary columns are worth 1, 2, 4, 8, … doubling to the left.
  • Read by adding the place values of the 1s; write by taking the largest place value that fits.
  • Binary 10 means two.