Study Guide Instructor view
Input and Output Devices
Teaching notes for Lesson 3.4, with controls for presenting it.
Keep this page on your own screen. Share only the lesson window. The lesson window holds no teaching notes, so sharing it cannot show them.
Presenting
- Open the lesson in its own window and share that window, not this one.
- Use Next and Previous here, or the lesson’s own, to move through the lesson. Next reveals one thing at a time: the next idea, or the answer to the question on screen, then the next step. Previous takes the last reveal back. The line below says what is on screen and what Next will show.
- Reveal hints and answers when the class is ready, and reset a demonstration before using it again.
The controls need JavaScript and a browser that supports BroadcastChannel. Without them, open the lesson in presentation mode and use its own controls.
The two windows talk to each other only inside this browser, on this device. Nothing is sent to a server, and no account is needed. A second device (a phone or another tablet) cannot follow the lesson window yet.
Now on the lesson window
- On screen
- Next teaching point
Guidance for this point
Lesson plan
- Level
- Intermediate
- Time
- About 90 minutes; the steps below add up to 90
Pupils work out for themselves what each input and output device must do (carry data in, present results out), predicting how a barcode, a touch, a mouse movement, a pixel or a printed dot could be made before the working is explained. The lesson ends with devices chosen for new situations and an explanation of one input and one output device, so you can see whether pupils understand how each device works rather than recognise its name.
Objectives
- Explain what input and output devices are and why a computer needs them
- Describe how barcode scanners, QR code scanners, digital cameras and 2D and 3D scanners capture data
- Describe how resistive, capacitive and infra-red touch screens detect a touch, and compare them
- Describe how an optical mouse, a keyboard and a microphone capture data
- Describe how LCD and LED screens, LCD and DLP projectors, inkjet and laser printers, speakers, actuators and 3D printers produce output
- Choose the most suitable input or output device for a situation, and justify the choice
Before the lesson
- Draw the made-up library kiosk on the board with arrows for data going in and results coming out; add to it as devices are met.
- Mini whiteboards, one per pupil, for predictions and show-me answers.
- If possible, bring a barcode on a packet, a QR code on paper, a clear sheet (acetate or glass) and an optical mouse for the mouse-on-glass demonstration.
- Print or display the three touch-screen types side by side (press, electric field, broken light beams) and the two screen designs (own light, backlight) as simple diagrams.
- This lesson is long (90 minutes): decide in advance where to break, for example after the touch screens step.
Steps
Introduction Opening
On the lesson window now
On screen: the lesson’s title, module and number; Next adds its objectives and key terms, as the lesson page lists them; Next again begins the first step.
Objectives on screen
- Explain what input and output devices are and why a computer needs them
- Describe how barcode scanners, QR code scanners, digital cameras and 2D and 3D scanners capture data
- Describe how resistive, capacitive and infra-red touch screens detect a touch, and compare them
- Describe how an optical mouse, a keyboard and a microphone capture data
- Describe how LCD and LED screens, LCD and DLP projectors, inkjet and laser printers, speakers, actuators and 3D printers produce output
- Choose the most suitable input or output device for a situation, and justify the choice
Purpose: Pupils work out for themselves what each input and output device must do (carry data in, present results out), predicting how a barcode, a touch, a mouse movement, a pixel or a printed dot could be made before the working is explained. The lesson ends with devices chosen for new situations and an explanation of one input and one output device, so you can see whether pupils understand how each device works rather than recognise its name.
1. A kiosk that takes things in and gives things out Think 6 min
On the lesson window now
Purpose: Pupils sort what the kiosk takes in from what it gives out, so that input and output are met as directions of data before any device is named.
Ask
- What does the kiosk take in from the pupil and the book?
- What does it give out?
- Is the pupil an input device? Why not?
Responses to expect
- The barcode and the tap
- The beep, the words on the screen and the receipt
- No: the pupil uses the device; the scanner is the input device
Misconceptions to challenge
- A learner may believe: “The pupil or the book is the input device.” Respond: The input device is the part of the machine that carries the data in, such as the barcode scanner.
- A learner may believe: “The scanner is an output device because it is the part the pupil sees working.” Respond: Ask which way the data is going: from the book into the computer, so it is an input device.
On the board or with the pen
- Draw arrows into and out of a box labelled kiosk and write each thing taken in or given out on its arrow.
What learners should notice
- A touch on a screen is input; the words appearing on the same screen are output.
- One device (a touch screen) can do both.
Checking understanding: Pupils write their two lists on mini whiteboards; the kiosk-output check shows who separates a device from a person.
Depending on the answers
- If pupils put the screen under input because it is touched: ask whether the tap or the words on the screen is going into the computer, and split the screen into two roles.
- If lists are complete: ask what other output the kiosk could give (a spoken message, a light).
English as an additional language
- Teach in and out with arrows; check scan, receipt and beep.
Discussion pause: Thirty seconds of silent listing, then pairs compare.
In the lesson window
- Think it through: Make two lists: everything the kiosk takes in from the pupil and the book, and everything it gives out.
- Check your understanding: In the library kiosk, which of these is an output device?
2. Reading stripes, squares and scenes Predict 9 min
On the lesson window now
Purpose: Pupils reason whether a barcode holds a price, then how a scanner reads the stripes, so that the barcode is understood as an identifier and the scanner as a light sensor.
Ask
- Does the barcode contain the price? What happens when the price changes?
- How could a scanner tell dark bars from white spaces?
- Why would a QR code be needed in place of a barcode on a poster?
Responses to expect
- Usually not: it holds a number and the till looks up the price
- By how much light is reflected back from each
- A QR code can hold much more data, such as a web address
Misconceptions to challenge
- A learner may believe: “A barcode stores the price, so a new barcode must be printed whenever it changes.” Respond: If that were so, every packet would need reprinting. Ask where the till finds the name and price after it scans the number.
- A learner may believe: “A barcode scanner takes a photograph of the packet, or measures heat or sound.” Respond: It uses a beam of light and measures how much comes back from dark bars and white spaces.
- A learner may believe: “A barcode stores a picture of the product.” Respond: It does not; the scanner turns bars and spaces into a number.
On the board or with the pen
- Draw a beam crossing bars and spaces with a graph of bright and dim readings beneath.
What learners should notice
- The dark bars reflect little light and the spaces reflect a lot.
- A QR code is read by a camera, not by a single beam.
Checking understanding: The barcode-how check with four options; ask pupils to say why each of the three wrong senses (picture, heat, sound) would not give a number.
Depending on the answers
- If pupils say the barcode holds the price: set the price change scenario and ask what the shop would have to do with 500 packets.
- If the idea is secure: ask what the database holds in addition to the price (the product’s name, stock).
Stretch
- Why might two different shops use the same barcode number for the same product but charge different prices?
English as an additional language
- Check barcode, reflect and database; hold up a real packet when possible.
Discussion pause: Ask pupils to predict what happens when the price changes before any explanation.
In the lesson window
- Think it through: Does the barcode on the packet contain the price? Think about what would happen on the day the shop changes the price of crisps.
- Check your understanding: How does a barcode scanner read a barcode?
3. Scanning a page and scanning an object Discover 7 min
On the lesson window now
Purpose: Pupils compare a photograph and a 3D model of a vase to work out what a 3D scanner records that a 2D scanner cannot.
Ask
- What can you do with a 3D model that you cannot do with a photograph?
- What does each type of scanner record?
- Which scanner would you use to make a copy of a solid object?
Responses to expect
- Turn it round, measure it, change it or print a copy
- A 2D scanner records a flat image; a 3D scanner records the shape from many surface points
- A 3D scanner
Misconceptions to challenge
- A learner may believe: “A 2D scanner records the shape of an object, and a 3D scanner makes a flat picture.” Respond: Check which scanner has to cope with depth: the 3D one.
- A learner may believe: “The two scanners record the same thing and only differ in size.” Respond: They differ in what they record. Ask what a flat picture lacks that a model has.
On the board or with the pen
- Draw a vase as a flat picture and as a set of dots on its surface, labelled 2D and 3D.
What learners should notice
- The 3D model stores many points on the surface, not a picture.
- A 2D scanner is a flatbed scanner for pages.
Checking understanding: The scanner-contrast check; ask pupils to explain the wrong options in terms of depth.
Depending on the answers
- If pupils choose the ‘same information’ option: give the vase again and ask which record could be printed as a solid copy.
English as an additional language
- Check flat, solid, surface and model with the vase drawing.
In the lesson window
- Think it through: A flat photograph of a clay vase and a 3D model of the same vase on a computer: what can you do with the 3D model that you cannot do with the photograph?
- Check your understanding: Which statement correctly contrasts a 2D scanner with a 3D scanner?
4. Three ways to tell that something touched the screen Think 10 min
On the lesson window now
Purpose: Pupils suggest what a screen could detect to find a touch, then match three methods (press, electric field, broken light) to realistic situations.
Ask
- What could a screen detect to tell that a finger touched it?
- Which type would ignore a gloved finger?
- Which type suits a very large wall display touched with a plastic pointer?
Responses to expect
- A press, a change in electricity, or interrupted light
- Capacitive, because rubber does not conduct
- Infra-red, because anything that breaks the beams is detected
Misconceptions to challenge
- A learner may believe: “Infra-red screens need bare skin.” Respond: Infra-red reacts to anything that breaks the beams, gloves and pointers included.
- A learner may believe: “Capacitive responds to any object.” Respond: Only to conductive ones. Ask whether a plastic pointer would change an electrostatic field.
- A learner may believe: “Resistive needs only a light touch, or every type works through gloves.” Respond: Resistive needs a press that pushes two layers together; the three types sense in different ways.
On the board or with the pen
- Draw three small diagrams for press, field and light beams and write the suitable touching objects under each.
What learners should notice
- Each type detects something different: a press, a field, a broken beam.
- Each question depends on the touching object, not the screen’s size.
Checking understanding: Show-me answers on gloved-cook and museum-wall; ask a pupil to say which wrong option would be right in a different situation.
Depending on the answers
- If many choose resistive for the gloves: ask whether a gloved finger can push two layers together and what a capacitive screen needs.
- If answers are secure: ask which type would work best in a small cheap device and why.
Support
- Provide a table with three types down the side and four touching objects across the top to fill with yes or no.
English as an additional language
- Teach press, conduct and beam; use a real touch screen to show gloves.
Discussion pause: Pairs decide on the glove question before any answers are given.
In the lesson window
- Think it through: A screen has to tell that a finger has touched it, and where. Suggest at least two different things the screen could detect to find out.
- Apply it: A school cook wears thick rubber gloves and must tap an order screen with a gloved finger. Which type of touch screen is most likely to ignore the touch?
- Apply it: A museum plans a very large wall display that visitors may touch with a finger, a plastic pointer or a gloved hand, without pressing hard. Which type is most suitable?
5. Mice, keys and microphones Predict 9 min
On the lesson window now
Purpose: Pupils predict how a ball-less mouse can sense movement, then apply that to a mouse that fails on glass, so ‘optical’ is understood as comparing pictures.
Ask
- How might an optical mouse tell which way and how far it moved?
- What does each device in the table sense?
- Why does the mouse jump about on clear glass?
Responses to expect
- By watching the surface: what it sees slides as the mouse moves
- Light, sound, movement and key presses, one for each device
- There are too few marks on the glass to compare between pictures
Misconceptions to challenge
- A learner may believe: “The glass is too smooth for the mouse’s ball.” Respond: An optical mouse has no ball. Ask what it uses to find out how it has moved.
- A learner may believe: “The glass stops the signal reaching the computer.” Respond: The signal goes from the mouse to the computer, not through the desk. Ask what is different about the surface it looks at.
- A learner may believe: “A microphone senses light.” Respond: It senses sound waves, which make a diaphragm vibrate.
On the board or with the pen
- Draw two pictures of a surface a moment apart with the pattern slid to the left; write ‘mouse moved right’ beneath.
What learners should notice
- The mouse needs detail on the surface to compare successive pictures.
- Each input device turns something physical into a signal.
Checking understanding: The what-is-detected table, then mouse-on-glass; ask pupils to say what would happen on a plain white sheet.
Depending on the answers
- If pupils choose the ‘ball’ option: show an optical mouse and ask where the ball is, then re-ask.
- If the idea is clear: ask why a mouse works on a printed mouse mat.
Stretch
- Why might a mouse work on a wooden desk but not on a mirror?
English as an additional language
- Check optical, surface and compare; show a mouse with its light on.
In the lesson window
- Think it through: An optical mouse has no rolling ball underneath. How might it tell which way, and how far, it has been moved over a desk?
- Apply it: An optical mouse moves smoothly on a wooden desk but jumps about on a sheet of clear glass. What is the most likely reason?
6. Two ways to light a pixel Think 7 min
On the lesson window now
Purpose: Pupils work out why a pixel lit from behind cannot show a true black as easily as one that makes its own light, before LCD and LED are distinguished.
Ask
- Where could the light of a pixel come from?
- Which design shows black more easily, and why?
- How would you describe an LCD and an LED screen?
Responses to expect
- From the pixel itself, or from a lamp behind it
- Own-light pixels, because they can switch off
- LCD: backlight and crystals that pass or block it; LED: each pixel makes its own light
Misconceptions to challenge
- A learner may believe: “An LCD makes its own light in every pixel.” Respond: That is the LED design. In an LCD the lamp is behind the screen and the crystals block or pass its light.
- A learner may believe: “They work the same and only the shape of the pixels differs.” Respond: The difference is where the light comes from. Ask what a pixel must do to show black in each design.
On the board or with the pen
- Draw a lamp behind a row of shutters (LCD) and a row of tiny lamps (LED).
What learners should notice
- A pixel that blocks light lets some through, so black is never fully black.
- Both designs are made of pixels.
Checking understanding: The lcd-and-led check; ask pupils to explain black in each design.
Depending on the answers
- If pupils swap LCD and LED: return to where the lamp is, and ask which design needs a backlight.
English as an additional language
- Check pixel, backlight and block; show the two diagrams.
In the lesson window
- Think it through: Where could the light of a pixel come from: from the pixel itself, or from a lamp behind it? Which design would let a screen show a truly black pixel more easily, and why?
- Check your understanding: Which statement correctly distinguishes an LCD screen from an LED screen?
7. Making a picture on a wall Discover 7 min
On the lesson window now
Purpose: Pupils reason out how a single lamp can make millions of pixels of different brightness, then meet DLP’s mirrors and LCD’s panels as two answers.
Ask
- What must a projector do to a single lamp’s light to make a picture?
- How does a DLP projector make a picture?
- How is an LCD projector different?
Responses to expect
- Control the light pixel by pixel
- Millions of tiny mirrors tilt towards or away from the lens
- It sends the light through liquid-crystal panels, one for each colour
Misconceptions to challenge
- A learner may believe: “A DLP projector draws the picture with a laser beam, line by line.” Respond: It lights the whole picture at once. Ask what sits in the path of the light.
- A learner may believe: “Each pixel in a DLP projector is an LED.” Respond: A projector has a lamp and controls its light. Ask what controls how much of it each pixel gets.
- A learner may believe: “DLP uses liquid-crystal panels.” Respond: That describes an LCD projector; DLP uses mirrors.
On the board or with the pen
- Draw one mirror tilted two ways with a lamp and a lens, and write bright or dark beside each.
What learners should notice
- A mirror pointing at the lens makes a bright pixel; pointing away makes a dark one.
- The proportion of time a mirror points at the lens sets its brightness.
Checking understanding: The dlp-how check with four options; ask a pupil to explain which part of the picture each wrong option describes.
Depending on the answers
- If pupils choose the LCD panel option: ask which projector uses panels and which uses mirrors, using the pupil’s own words.
English as an additional language
- Check mirror, tilt and lens; use a hand mirror and a torch to demonstrate.
In the lesson window
- Think it through: A projector has a single bright lamp but must make a picture with millions of pixels, each of a different brightness. What does it have to do to the lamp’s light between the lamp and the screen?
- Check your understanding: How does a DLP projector make the picture?
8. Putting ink on paper Predict 8 min
On the lesson window now
Purpose: Pupils suggest two ways to get dots of colour on a page (spray or stick-and-fix), then compare inkjet and laser printers.
Ask
- What are two different ways a printer could get colour on a page?
- How does a laser printer make the page?
- Which printer suits text for hundreds of copies?
Responses to expect
- Spray liquid ink, or stick powder and fix it
- A charged drum picks up toner, which is moved to paper and heated
- A laser printer
Misconceptions to challenge
- A learner may believe: “A laser printer sprays ink through nozzles.” Respond: That describes an inkjet printer. Ask what a laser printer puts on the paper instead.
- A learner may believe: “A laser printer presses an inked ribbon with pins.” Respond: That is a different, older kind of printer. Ask which part the laser acts upon.
- A learner may believe: “An inkjet is the fast, cheap choice for lots of text.” Respond: An inkjet is a good choice for photographs and small amounts; a laser is fast and cheap per page for lots of text.
On the board or with the pen
- Make a two-column table, inkjet and laser, with how it works and what it suits.
What learners should notice
- The laser draws the page on the drum as a pattern of charge.
- Heat fixes the toner to the paper.
Checking understanding: The laser-how check, then four-hundred-letters in the next step; ask pupils to explain the word ‘fix’.
Depending on the answers
- If pupils mix the two methods: go back to spray or stick and ask which printer is which.
Stretch
- Why might an inkjet cost less to buy but more per page to run?
English as an additional language
- Check toner, drum and nozzle; show each as a simple picture.
In the lesson window
- Think it through: A printer has to get tiny dots of colour onto a page. What are two different ways it might do this?
- Check your understanding: Which statement about how a laser printer works is correct?
9. Sound, movement and solid objects Discover 6 min
On the lesson window now
Purpose: Pupils extend the idea of output beyond pictures and paper to sound, movement and solid objects, and see that a 3D printer adds material layer by layer.
Ask
- What other kinds of output might a computer give besides pictures?
- How does a 3D printer make an object?
- What does each output device in the table produce?
Responses to expect
- Sound, movement and a solid object
- By building it up in thin layers from a 3D model
- Speaker: sound; actuator: movement; 3D printer: object
Misconceptions to challenge
- A learner may believe: “A 3D printer cuts an object out of a block.” Respond: That removes material; a 3D printer adds it layer by layer.
- A learner may believe: “A 3D printer prints a flat picture and folds it.” Respond: It follows a 3D model, not a flat picture.
On the board or with the pen
- Add speaker, actuator and 3D printer boxes to the kiosk output side.
What learners should notice
- Each output device changes a signal into something physical.
- An actuator, such as a motor, turns a signal into movement.
Checking understanding: The what-is-produced table and the three-d-printer check; ask pupils to explain adding versus cutting.
Depending on the answers
- If pupils choose the cutting option: ask whether material is taken away or added, and which technique is called ‘additive’.
English as an additional language
- Check layer, actuator and speaker; show a layer drawing.
In the lesson window
- Think it through: Besides words and pictures on a screen or paper, what other kinds of output might a computer give? Suggest two.
- Check your understanding: How does a 3D printer make an object?
10. Choosing the right device Apply 13 min
On the lesson window now
Purpose: Pupils apply what they know to new situations: a poster link, a broken metal part, a school letter, a mistaken explanation and a greenhouse window.
Ask
- What should the poster carry so a phone can read it?
- Which input device captures an exact copy of a broken part?
- Which printer for 400 text letters?
- What is wrong with Lena’s claim about barcodes?
- Which output device opens the window?
Responses to expect
- A QR code
- A 3D scanner
- A laser printer
- A barcode stores a product number; the price is looked up in a database
- An actuator, such as a motor
Misconceptions to challenge
- A learner may believe: “A barcode can hold a web address.” Respond: A barcode holds a short number; a QR code holds more data, including an address.
- A learner may believe: “A 2D scanner or a photograph captures the whole shape of a part.” Respond: A photograph shows one side; the engineer needs the whole shape, which a 3D scanner measures.
- A learner may believe: “A speaker, screen or printer can open the window.” Respond: Those present information; opening needs movement, which an actuator provides.
What learners should notice
- In each question the wrong options belong to devices met earlier in the lesson.
Checking understanding: Show-me answers on every apply question; ask pupils to name the device each wrong option really describes.
Depending on the answers
- If pupils choose inkjet for 400 letters: ask which printer is fast and cheap per page for lots of text.
- If the class finds these easy: ask pupils to invent one new situation and a matching device for a partner to choose.
Support
- Offer a list of the devices met with one-line jobs to refer to while answering.
Stretch
- A shop wants to scan a customer’s foot to make a shoe. Which input and which output devices would be involved, and why?
English as an additional language
- Allow short answers: device, because ___.
In the lesson window
- Apply it: A shop wants customers to point a phone camera at a poster and be taken to the shop’s web page. What should the poster carry so that the phone can read it?
- Apply it: An engineer wants an exact computer copy of a broken metal part, so that a replacement can be made. Which input device is best for capturing it?
- Apply it: A school office prints 400 copies of a text-only letter every term, and wants it done quickly and cheaply per page. Which printer is more suitable?
- Apply it: Lena says: “A barcode stores the price of the item, so a shop has to print a new barcode whenever the price changes.” What is wrong with this?
- Apply it: A school greenhouse’s computer must open a window when it gets too hot. Which output device does the job of opening it?
11. Show what you know Consolidate 8 min
On the lesson window now
Purpose: Pupils explain how one input and one output device work in their own words and identify the odd one out, which tests understanding of direction (in or out) as well as mechanism.
Ask
- Choose one input and one output device, explain how each works and why a computer needs them.
- Which of the four is not an input device?
Responses to expect
- A correct mechanism for each, tied to data going in or results coming out
- A DLP projector
Misconceptions to challenge
- A learner may believe: “A touch screen is only an input device.” Respond: It senses touch (input) and also displays the picture (output).
- A learner may believe: “A projector is an input device because it ‘takes in’ the picture.” Respond: It presents results, so it is an output device.
On the board or with the pen
- Write pupils’ chosen devices in two columns, input and output, and add one fact about how each works.
Checking understanding: Collect explanations; check for a correct mechanism (reflected light, electric field, mirrors, layers) and the words input or output.
Depending on the answers
- If explanations name a device without saying how it works: ask ‘what does it detect?’ or ‘what does it make?’ to draw out the mechanism.
- If answers are strong: ask pupils to explain why one device may be both an input and an output device.
Support
- Provide a sentence frame: A ___ works by ___. A computer needs it because ___.
English as an additional language
- Allow a labelled sketch plus one sentence.
Discussion pause: Two minutes of silent writing before pairs compare.
In the lesson window
- Think it through: Choose one input device and one output device from this lesson. Explain how each one works, in your own words, and why a computer needs devices like them.
- Apply it: Which one of these is NOT an input device?
Lesson recap Closing
On the lesson window now
On screen: the lesson’s objectives again; Next adds the closing question, which asks the class to explain each one in their own words without looking back. It says nothing about what anyone has learnt: use the answers to decide what to revisit.
Points to listen for
- Ask pupils to complete a two-column sort from memory: every device in the lesson under input or output, with a one-word note on what it senses or makes.
- Take one wrong option from the lesson (for example the barcode holds the price) and ask pupils to write a two-line correction for someone younger.
- Look ahead: sensors are the next lesson, so ask pupils to say how a sensor differs from the input devices met today (it measures a physical property).
- Ask pupils to name one device they used today and explain whether it was input, output or both.
Consolidation
- Ask pupils to complete a two-column sort from memory: every device in the lesson under input or output, with a one-word note on what it senses or makes.
- Take one wrong option from the lesson (for example the barcode holds the price) and ask pupils to write a two-line correction for someone younger.
- Look ahead: sensors are the next lesson, so ask pupils to say how a sensor differs from the input devices met today (it measures a physical property).
- Ask pupils to name one device they used today and explain whether it was input, output or both.