Study Guide Instructor view
Logic Expressions and Truth Tables
Teaching notes for Lesson 2.3, with controls for presenting it.
Keep this page on your own screen. Share only the lesson window. The lesson window holds no teaching notes, so sharing it cannot show them.
Presenting
- Open the lesson in its own window and share that window, not this one.
- Use Next and Previous here, or the lesson’s own, to move through the lesson. Next reveals one thing at a time: the next idea, or the answer to the question on screen, then the next step. Previous takes the last reveal back. The line below says what is on screen and what Next will show.
- Reveal hints and answers when the class is ready, and reset a demonstration before using it again.
The controls need JavaScript and a browser that supports BroadcastChannel. Without them, open the lesson in presentation mode and use its own controls.
The two windows talk to each other only inside this browser, on this device. Nothing is sent to a server, and no account is needed. A second device (a phone or another tablet) cannot follow the lesson window yet.
Now on the lesson window
- On screen
- Next teaching point
Guidance for this point
Lesson plan
- Level
- Intermediate
- Time
- About 60 minutes; the steps below add up to 60
Pupils learn the systematic method that IGCSE truth-table questions need: list eight rows in counting order, write the circuit as an expression, and complete working columns before the output. They then apply the same method to a circuit, an expression and a description. Four of the syllabus's nine conversions are practised here; the other five are in Lesson 4.
Objectives
- List every combination of three inputs in order, and explain why there are eight
- Write the logic expression for a logic circuit, using brackets to show which gate works first
- Complete a truth table for a circuit with up to three inputs, using a working column for each gate
- Complete a truth table from a logic expression
- Complete a truth table from a description of a problem
Before the lesson
- Print the blank three-input table (A, B, C, two working columns, Q) for pupils who prefer paper, or who will work without a device.
- On whiteboard page 1, prepare an eight-row table with A, B and C filled in, for the class walkthrough.
- Have the greenhouse circuit drawn small on whiteboard page 2, for tracing rows.
Steps
Introduction Opening
On the lesson window now
On screen: the lesson’s title, module and number; Next adds its objectives and key terms, as the lesson page lists them; Next again begins the first step.
Objectives on screen
- List every combination of three inputs in order, and explain why there are eight
- Write the logic expression for a logic circuit, using brackets to show which gate works first
- Complete a truth table for a circuit with up to three inputs, using a working column for each gate
- Complete a truth table from a logic expression
- Complete a truth table from a description of a problem
Purpose: Pupils learn the systematic method that IGCSE truth-table questions need: list eight rows in counting order, write the circuit as an expression, and complete working columns before the output. They then apply the same method to a circuit, an expression and a description. Four of the syllabus's nine conversions are practised here; the other five are in Lesson 4.
1. How many situations? Think 6 min
On the lesson window now
Purpose: Pupils work out why there are eight rows, then learn the counting order that guarantees none is missed.
Ask
- How many situations?
- What comes after 011?
Responses to expect
- Eight, by doubling
- 100
Misconceptions to challenge
- A learner may believe: “Three inputs need six rows (three times two).” Respond: List them: each of the four A–B situations happens with C = 0 and with C = 1.
- A learner may believe: “After 011 comes 012.” Respond: Each column is only 0 or 1: like 9 rolling over to 10 in ordinary counting.
On the board or with the pen
- Write the eight rows on the board, colouring C's column to show it alternates every row, B's every two and A's every four.
Checking understanding: The check question shows who can continue the sequence; ask pupils to write the next two rows on mini whiteboards.
Depending on the answers
- If several pupils choose 110: count to 7 in binary together before going on.
English as an additional language
- Use the word combination with the gesture of picking from two piles.
In the lesson window
- Think it through: How many different situations can the controller be in? How do you know you have them all?
- Check your understanding: In a three-input truth table, which row comes straight after A = 0, B = 1, C = 1?
2. Writing a circuit down Discover 8 min
On the lesson window now
Purpose: Circuit to expression (3c ii): pupils describe a circuit in words first, then meet the expression and brackets.
Ask
- Describe the circuit from left to right.
- Why does the expression need brackets?
Responses to expect
- A and B into AND, then OR with C
- To show which gate comes first
Misconceptions to challenge
- A learner may believe: “Expressions are read left to right like a sentence, so brackets are unnecessary.” Respond: Show that A OR B AND C could mean two different circuits.
On the board or with the pen
- Trace each wire with the pen while reading the expression aloud, bracket by bracket.
Checking understanding: The matching question: the bracket-swap distractor shows who is reading the wires.
Depending on the answers
- If many choose (A OR B) AND C: trace the second circuit's wires together and ask which inputs meet first.
In the lesson window
- Think it through: Describe in words what this circuit does, starting from the inputs on the left.
- Check your understanding: Which logic expression matches this circuit?
3. Completing a circuit’s truth table Experiment 12 min
On the lesson window now
Purpose: Circuit to truth table (3b iii): first with the working column given, then with both columns blank.
Ask
- Which column do you fill first?
- Why is Q 0 in the row 110 of the second table?
Responses to expect
- The working column
- C is 0, and AND needs both
Misconceptions to challenge
- A learner may believe: “Q can be worked out directly from A, B and C without the middle step.” Respond: It can, but it is where errors start. Fill the working column for every row first.
- A learner may believe: “The working column is the answer.” Respond: It is the inside of the circuit: Q still has to be worked out from it.
On the board or with the pen
- Fill row 110 on the whiteboard, tracing the values through the small circuit drawing.
- Use the lasso to keep the circuit beside the table if the class is looking at the shared screen.
What learners should notice
- In the first table, Q copies C whenever the working column is 0.
Checking understanding: Watch who uses Check once and gets all eight: they can move to the second table while others use the hints.
Depending on the answers
- If most errors are in the Q column but the working column is right: the gate rule is the problem: revisit OR's rule from Lesson 1.
- If errors start in the working column: the inputs are being misread: read one row aloud together, input by input.
Support
- Allow the printed table with the working column already filled for the second task.
Stretch
- Find the rows where the two circuits give different outputs, and explain why.
In the lesson window
- Think it through: In the second table, explain why Q is 0 in the row A = 1, B = 1, C = 0, even though both A and B are 1.
- Truth table task
- Truth table task
4. The order matters Check 5 min
On the lesson window now
Purpose: Error identification: a plausible but wrong method, corrected by the brackets.
Ask
- Where did Lee go wrong?
Responses to expect
- Lee did OR before AND
Misconceptions to challenge
- A learner may believe: “Always work left to right.” Respond: Brackets come first, as in arithmetic: compare 2 + (3 × 4).
On the board or with the pen
- Write Lee's working, then cross through the first line and rewrite it bracket first.
English as an additional language
- Compare with arithmetic, which uses the same bracket rule in any language.
In the lesson window
- Check your understanding: Lee works out Q = A OR (B AND C) for A = 1, B = 0, C = 0 like this: “A OR B is 1, then 1 AND C is 0, so Q = 0.” What has gone wrong?
5. From an expression to a truth table Experiment 7 min
On the lesson window now
Purpose: Expression to truth table (3b ii) without a diagram.
Ask
- Which working columns do you need?
Responses to expect
- A OR B, and NOT C
Misconceptions to challenge
- A learner may believe: “NOT C applies to the whole expression.” Respond: NOT applies only to what follows it: here just C.
Checking understanding: Completing this table without a circuit shows the method has transferred.
Depending on the answers
- If pupils put NOT on the whole expression: draw the circuit for them on the whiteboard and compare.
Stretch
- Write a different expression that gives the same table.
In the lesson window
- Think it through: Which working columns will you need before you can work out Q?
- Truth table task
6. From a description to a truth table Apply 8 min
On the lesson window now
Purpose: Problem statement to truth table (3b i): pupils reason from the words, with no expression given.
Ask
- Which conditions must be true together?
- Which works on its own?
Responses to expect
- Door opened and alarm set
- The panic button
Misconceptions to challenge
- A learner may believe: ““While” means OR.” Respond: “While” means at the same time: both must be true.
On the board or with the pen
- Underline “while” and “or” in the description, and write AND and OR above them.
Support
- Ask pupils to translate the description into an expression first, then complete the table from it.
English as an additional language
- Explain while (at the same time) and or (either) with two short spoken examples.
In the lesson window
- Think it through: Which conditions must be true together, and which one works on its own?
- Truth table task
7. A circuit to write and work out Apply 7 min
On the lesson window now
Purpose: Identify unlabelled gates, write the expression, then complete the table: three skills in one task.
Ask
- Which symbols are these?
- Which column first?
Responses to expect
- XOR then AND
- A XOR B
Misconceptions to challenge
- A learner may believe: “The first gate is OR.” Respond: Count the curves at the back: XOR has two.
Checking understanding: This task is a good mid-lesson assessment: it combines Lesson 2's symbols with today's method.
Depending on the answers
- If many misidentify XOR as OR: show the Lesson 2 symbol gallery again for one minute.
In the lesson window
- Apply it: Identify the gates from their symbols. Which expression describes this circuit?
- Truth table task
8. Show what you know Consolidate 7 min
On the lesson window now
Purpose: Pupils write the method as steps, complete a final table, and say which kind of question is hardest.
Ask
- Write the method as numbered steps.
- Which kind of table is hardest?
Responses to expect
- Rows in order, working columns, output, check
Checking understanding: The final table (A OR NOT (B AND C)) has two working columns and NOT on a bracket: it shows whether the method is secure.
Depending on the answers
- If the final table has errors in NOT (B AND C): begin Lesson 4 by working that column together.
In the lesson window
- Think it through: Write the method you would use to complete the truth table for any circuit with three inputs, as numbered steps someone else could follow.
- Think it through: Which kind of table is hardest for you: from a circuit, from an expression, or from a description? Why?
- Truth table task
Lesson recap Closing
On the lesson window now
On screen: the lesson’s objectives again; Next adds the closing question, which asks the class to explain each one in their own words without looking back. It says nothing about what anyone has learnt: use the answers to decide what to revisit.
Points to listen for
- Eight rows for three inputs, in counting order.
- An expression writes the circuit in words; brackets show which gate is first.
- A working column for every gate before the last.
- The same method from a circuit, an expression or a description.
Consolidation
- Eight rows for three inputs, in counting order.
- An expression writes the circuit in words; brackets show which gate is first.
- A working column for every gate before the last.
- The same method from a circuit, an expression or a description.