Study Guide Instructor view
Modelling the Real World
Teaching notes for Lesson 5.20, with controls for presenting it.
Keep this page on your own screen. Share only the lesson window. The lesson window holds no teaching notes, so sharing it cannot show them.
Presenting
- Open the lesson in its own window and share that window, not this one.
- Use Next and Previous here, or the lesson’s own, to move through the lesson. Next reveals one thing at a time: the next idea, or the answer to the question on screen, then the next step. Previous takes the last reveal back. The line below says what is on screen and what Next will show.
- Reveal hints and answers when the class is ready, and reset a demonstration before using it again.
The controls need JavaScript and a browser that supports BroadcastChannel. Without them, open the lesson in presentation mode and use its own controls.
The two windows talk to each other only inside this browser, on this device. Nothing is sent to a server, and no account is needed. A second device (a phone or another tablet) cannot follow the lesson window yet.
Now on the lesson window
- On screen
- Next teaching point
Guidance for this point
Lesson plan
- Level
- Intermediate
- Time
- About 75 minutes; the steps below add up to 100
Learners meet modelling through a bus map, decide what a model keeps for a given question, describe a crossing and a game character with states, events and transitions, run a simulation of a canteen queue in a table, and evaluate what the model leaves out. No code is needed.
Objectives
- Explain that a model keeps the details that matter to a question and leaves out the rest
- Describe a system by its states, the events that happen and the transitions between states
- Complete and use a table of state, event and next state for a crossing and a game character
- Run a simple simulation step by step and use it to answer a what-if question
- Evaluate a model by naming what it leaves out and how that limits what it can tell you
Before the lesson
- Mini whiteboards or paper for the tables.
- Optional: counters to act out the canteen queue.
- A clear view of the crossing table on the board.
Steps
Introduction Opening
On the lesson window now
On screen: the lesson’s title, module and number; Next adds its objectives and key terms, as the lesson page lists them; Next again begins the first step.
Objectives on screen
- Explain that a model keeps the details that matter to a question and leaves out the rest
- Describe a system by its states, the events that happen and the transitions between states
- Complete and use a table of state, event and next state for a crossing and a game character
- Run a simple simulation step by step and use it to answer a what-if question
- Evaluate a model by naming what it leaves out and how that limits what it can tell you
Purpose: Learners meet modelling through a bus map, decide what a model keeps for a given question, describe a crossing and a game character with states, events and transitions, run a simulation of a canteen queue in a table, and evaluate what the model leaves out. No code is needed.
1. A map that is not a map Think 6 min
On the lesson window now
Purpose: Begin with a familiar model that leaves out most of reality, and ask what is lost.
Ask
- What does the bus map leave out?
- For which question would it be no use?
Responses to expect
- Street shapes and distances
- How far apart two stops really are
Misconceptions to challenge
- A learner may believe: “A map must show everything to be useful.” Respond: Ask what the bus map would look like if it did.
Checking understanding: Pairs share one thing the map leaves out and one question it still answers.
English as an additional language
- Check route, stop and distance.
In the lesson window
- Think it through: What does the bus map leave out? Why is it still useful, and for which questions would it be no use at all?
2. What a model keeps, and why Discover 8 min
On the lesson window now
Purpose: Link purpose to what is kept: the same canteen has different models for different questions.
Ask
- Which representation answers the headteacher’s question?
- Which detail does the model need?
Responses to expect
- The count of pupils arriving and served
- Arrivals and the serving rate
Misconceptions to challenge
- A learner may believe: “A good model includes as much detail as possible.” Respond: Ask whether the colour of the tills changes the queue.
- A learner may believe: “A model is a smaller copy.” Respond: It is a simplified description made for one purpose.
Checking understanding: The which-detail check.
Depending on the answers
- If pupils choose the menu prices: ask what question prices would answer
In the lesson window
- Think it through: The headteacher asks: “How long will the queue at the canteen get at lunchtime?” Which of the three representations would you use, and what from the other two would you not need?
- Check your understanding: A model is built to answer “how long will the queue get?”. Which detail does the model need?
3. A crossing’s lights Predict 10 min
On the lesson window now
Purpose: Pupils find the crossing’s states and events themselves, then meet the words state, event and transition.
Ask
- What situations can the crossing be in?
- What makes it change?
Responses to expect
- Four: cars go, cars slow, people cross, people hurry
- A button press and a timer ending
Misconceptions to challenge
- A learner may believe: “The colour of a light is the state.” Respond: The state is the whole situation: all the lights together.
- A learner may believe: “An event is a state.” Respond: A state lasts; an event happens at a moment.
On the board or with the pen
- Draw four boxes in a ring for the states, with the timer arrows between them.
Checking understanding: The state-or-event check.
Depending on the answers
- If pupils choose a state as the event: ask which option is something that happens and which lasts for a while
In the lesson window
- Think it through: List the different situations the crossing can be in, such as which lights are showing, and say what makes it change from one situation to the next. Try to find four situations and two things that make the crossing change.
- Check your understanding: Which of these is an event, not a state, in the crossing’s model?
4. Writing the model as a table Experiment 14 min
On the lesson window now
Purpose: Write and then use the model as a table, including events that change nothing.
Ask
- What is the next state for each row?
- Why does a row for a press in People cross exist?
Responses to expect
- The table as completed
- An event can still happen, so the model must say what it does
Misconceptions to challenge
- A learner may believe: “Events that do nothing do not need a row.” Respond: The model must decide what happens, even if it is nothing.
- A learner may believe: “Every event changes the state.” Respond: Four rows of the table keep it the same.
Checking understanding: The run through seven events, and the ignored-press check: the “remembers the press” option is a different model, not a mistake.
Depending on the answers
- If pupils change state on every event: return to the rules and ask what they say for a press in Cars slow
- If pupils run the model correctly: ask them to design a rule that remembers a press and say what states it needs
Support
- Colour the states in the table to follow the path.
In the lesson window
- Check your understanding: At step 5 the button is pressed while the state is People hurry, and the state stays the same. What is the best explanation, in this model?
5. A game character as states Apply 10 min
On the lesson window now
Purpose: Apply states and events to a different system and find a gap in a model.
Ask
- Which pair has no row?
- What should happen on a second jump?
Responses to expect
- Jumping with jump key pressed
- Either nothing, or a new double-jump state
Misconceptions to challenge
- A learner may believe: “A model is complete once it has rows for every change.” Respond: It must also cover events that can happen but do not change anything.
Checking understanding: The missing-row check, then pupils share their design choice.
Stretch
- Add a Crouching state and say which rows it needs.
In the lesson window
- Apply it: A tester presses the jump key while the character is already Jumping. Which pair of state and event has no row in the table?
- Think it through: Decide what the model should do when the jump key is pressed while Jumping, and write the row you would add. Give a reason, and say how the game would feel to play with your choice.
6. Running a model over time Predict 14 min
On the lesson window now
Purpose: Run a model over time with a simple rule and read the result.
Ask
- Does the queue grow at first?
- What is the longest queue?
Responses to expect
- Yes, because more arrive than are served
- 5, at the end of minute 3
Misconceptions to challenge
- A learner may believe: “The longest queue is the biggest number in the Waiting column.” Respond: That is before anyone is served. The queue left is what remains.
- A learner may believe: “The till always serves 2.” Respond: It serves the smaller of 2 and the number waiting.
On the board or with the pen
- Draw the queue as dots, adding arrivals and removing served pupils each minute.
Checking understanding: The longest-queue check, with distractors from the waiting column and the wrong minute.
Depending on the answers
- If pupils mix up waiting and left: trace minute 3 aloud: 4 left, plus 3 arriving, 2 served
- If pupils finish quickly: ask them to change the serving rate and predict first
Support
- Give the Waiting column filled in.
In the lesson window
- Think it through: Without working it out exactly, guess: does the queue grow at first, and does it ever get shorter? How long do you think the longest queue will be, and in which minute?
- Check your understanding: What is the longest queue left at the end of any minute, and in which minute?
7. Asking what if? Explain 8 min
On the lesson window now
Purpose: Use the model for a what-if: a change to the number served.
Ask
- What happens with 4 served per minute?
- What about 3?
Responses to expect
- Nobody is left waiting
- At most 2 are left, at the end of minutes 2 and 3
Misconceptions to challenge
- A learner may believe: “Three is nearly as good as four.” Respond: Compute minute 1: 4 arrive and 3 are served.
Checking understanding: The second-till check.
Depending on the answers
- If pupils try the real canteen: point out that changing the model costs nothing, which is the advantage
In the lesson window
- Think it through: Change the model so that the till or tills serve 4 pupils a minute, keeping the same arrivals (4, 4, 3, 1, 1, 0, 0). Predict what happens to the queue. Then work out the queue left each minute, to see if you were right.
- Check your understanding: A pupil asks whether three pupils served per minute instead of four would be enough. Using the same arrivals, what is the longest queue left at the end of a minute?
8. How far can a model be trusted? Apply 10 min
On the lesson window now
Purpose: Evaluate a model: what it leaves out, and what a result can and cannot show.
Ask
- What does the queue model leave out?
- What should the school do if the real queue is 9?
Responses to expect
- Bursts at the bell, slow choosers, breaks at the till
- Compare assumptions with what happened and adjust
Misconceptions to challenge
- A learner may believe: “A simulation proves what will happen.” Respond: It shows what happens if its assumptions are true.
- A learner may believe: “A wrong model is useless.” Respond: The difference shows which assumptions to change.
Checking understanding: The two apply questions: both wrong options at the extremes are common.
Depending on the answers
- If pupils say the model is worthless: ask what they learned from the difference of 9 and 5
- If pupils say it proves it: ask what the model assumes about arrivals
In the lesson window
- Apply it: On a real Tuesday the longest queue in the canteen was 9 pupils, but the model with one till said 5. What is the most sensible next step?
- Apply it: Dev (fictional) says: “The simulation proves a second till will remove the queue.” Which reply is most accurate?
9. Design a model of your own Apply 12 min
On the lesson window now
Purpose: Independent design of a state table for a new system.
Ask
- What are your states and events?
- Which pairs cannot matter?
Responses to expect
- Waiting, Paid, Giving drink; coin, choice, refund, drink taken
- For example a refund while waiting
Misconceptions to challenge
- A learner may believe: “The table only needs the rows that change the state.” Respond: Every state and event pair needs a decision.
Checking understanding: Pupils swap tables and check that there is a row for every pair.
Support
- Provide the three states and four events and ask for the table only.
Stretch
- Add a state for “sold out” and the rows it needs.
In the lesson window
- Think it through: Design a state model for the machine. Give its states and its events, then write the table with a row for every pair of state and event. Say one thing your model leaves out.
10. Show what you know Consolidate 8 min
On the lesson window now
Purpose: Explain the ideas for a new system and choose a model for a new question.
Ask
- Describe a lift or a bell as states and events.
- Which model answers the timetable question?
Responses to expect
- States such as stopped and moving, with events such as button pressed
- The one with arrivals and departures minute by minute
Misconceptions to challenge
- A learner may believe: “The model must include the colours of the buses to be realistic.” Respond: Ask whether colour changes the waiting time.
Checking understanding: Collect the “least sure” questions.
Depending on the answers
- If pupils choose the map: ask what question the map answers
In the lesson window
- Think it through: Explain in your own words what a model keeps and leaves out, and what a state, an event and a simulation are. Use a system that is not in this lesson, such as a school bell, a lift or a washing machine.
- Apply it: A fictional town wants to test whether a new bus timetable would shorten the waiting time at its stops. Which model should the town build?
- Think it through: Which part of this lesson are you least sure about? Write one question you would ask your teacher.
Lesson recap Closing
On the lesson window now
On screen: the lesson’s objectives again; Next adds the closing question, which asks the class to explain each one in their own words without looking back. It says nothing about what anyone has learnt: use the answers to decide what to revisit.
Points to listen for
- A model keeps what a question needs and leaves out the rest.
- A state is how a system is; an event happens; a transition is the change an event causes, and a table of state, event and next state describes it.
- A simulation runs a model step by step; change a number and run again to answer what if.
- A model gives results under its assumptions: test it against real observations.
Consolidation
- A model keeps what a question needs and leaves out the rest.
- A state is how a system is; an event happens; a transition is the change an event causes, and a table of state, event and next state describes it.
- A simulation runs a model step by step; change a number and run again to answer what if.
- A model gives results under its assumptions: test it against real observations.