Study Guide
Primary Storage and Virtual Memory
The memory the CPU can reach directly: what RAM and ROM are, how they differ and why a computer needs both; and what virtual memory is, how it is created and used, and why it is needed when RAM runs out.
Lesson 3.6 Computer Systems
For: Cambridge IGCSE Computer Science learners
Stage: Think
The desk and the locker
A pupil (a made-up one) is doing homework. The books and notes needed right now are on the desk. Everything else is in a locker down the corridor. A printed card of rules is stuck firmly to the lid of the desk, and nobody ever writes on it. At the end of the day, the cleaner clears the desk completely.
Think it through
Why is it quicker to work from what is on the desk than from the locker? And what is the drawback of keeping something only on the desk?
- Hint 1: How long does it take to reach each? What happens to the desk each evening?
Show what happens
Things on the desk are within reach, with no trips down the corridor. But the desk is cleared every evening, so anything left only on it is lost. The locker is slower to use, but what is in it is kept. A computer’s memory has the same pattern.
Primary storage is memory that the CPU can access directly: it can fetch from it, along the address and data buses, without any other device being involved. It is the desk. In a computer, it consists of RAM and ROM.
Secondary storage, such as a hard disk drive or a solid-state drive, is not accessed directly by the CPU. It is the locker: it keeps programs and files permanently, but a program has to be copied from it into primary storage before the CPU can run it. (How secondary storage works belongs to a later lesson.)
Check your understanding
Show the answer
Answer: C. Memory that the CPU can access directly, such as RAM and ROM.
Primary storage is memory the CPU accesses directly.
Stage: Predict
The desk: RAM
Think it through
A pupil has typed half an essay and has not saved it. The power fails. What do you expect has happened to the unsaved essay? Why?
- Hint 1: Which memory was the essay in while it was being typed?
Show what happens
The essay is lost. It was held in the memory the computer uses for work in progress, which is cleared when the power goes off, like the desk at the end of the day.
RAM (random access memory) is the computer’s main working memory. It holds the programs and data that are in use at the moment: the operating system, the programs that are running, and the files that are open. The CPU can both read from RAM and write to it, very quickly, so the contents change all the time. “Random access” means that the CPU can go straight to any location by its address, and it takes the same time whichever it is.
RAM is volatile: it loses its contents when the power is switched off. That is why unsaved work is lost in a power cut, and why files must be saved to secondary storage.
Check your understanding
Show the answer
Answer: B. It can be read from and written to, and it loses its contents when the power is off.
RAM is volatile.
Stage: Think
The card on the desk lid: ROM
Think it through
When a computer is switched on, RAM is empty, because it loses its contents when the power is off. Yet the CPU starts working straight away. Where could its very first instructions come from?
- Hint 1: What kind of memory would still have its contents after being switched off?
Show what happens
They must be in memory that keeps its contents without power, and that is put there when the computer is made. That memory is ROM, like the card of rules that stays stuck to the desk.
ROM (read-only memory) is memory whose contents are fixed during normal use: the computer can read it, but the programs it runs do not change it. ROM is non-volatile: it keeps its contents when the power is switched off.
ROM holds the start-up instructions (the bootstrap program) that run when the computer is switched on. They check that the hardware is working and then load the operating system from secondary storage into RAM, after which the operating system takes over. ROM is also where the fixed program of an embedded system is usually kept, so that the washing machine is ready to work the moment it is switched on.
ROM and secondary storage both keep their contents without power, so the two can be mixed up. But ROM is primary storage that the CPU reads directly, holds only a small amount of fixed start-up instructions, and is not used for the user’s files. Secondary storage holds a very large amount of changeable programs and files that are copied into RAM before they are used.
Check your understanding
Show the answer
Answer: A. Holding the start-up instructions, which stay when the power is off.
ROM holds the start-up instructions.
Stage: Discover
Why a computer needs both
Think it through
Imagine one computer built with only ROM, and another with only RAM. What would be the problem with each?
- Hint 1: Which one could not hold a changing document? Which one would have nothing to tell it what to do at switch-on?
Show what happens
Do not confuse: RAM and ROM
- Can it be changed?RAM
- Yes. It is read and written all the time, as programs run.An open document and the running program.
- Can it be changed?ROM
- No, not in normal use. The contents are fixed and only read.The start-up instructions.
- Kept without power?RAM
- No: it is volatile.Unsaved work is lost in a power cut.
- Kept without power?ROM
- Yes: it is non-volatile.The start-up instructions are there at switch-on.
| Description | RAM or ROM |
|---|---|
| Loses its contents when the power is switched off | |
| Holds the start-up instructions | |
| Holds the programs and data currently in use | |
| Its contents are not changed while the computer is running | |
| Can be written to as well as read from during normal use |
- RAM: working memory, changes, volatile. ROM: fixed, start-up, non-volatile.
Show the completed table
| Description | RAM or ROM |
|---|---|
| Loses its contents when the power is switched off | RAM |
| Holds the start-up instructions | ROM |
| Holds the programs and data currently in use | RAM |
| Its contents are not changed while the computer is running | ROM |
| Can be written to as well as read from during normal use | RAM |
Apply it
Show the answer
Answer: D. There would be nothing in memory to tell the CPU what to do at switch-on, as RAM starts empty.
Without ROM, the computer has nothing to start from.
Stage: Predict
When the desk is full
The pupil’s desk has room for four books. The teacher hands out a fifth, and it is needed right now.
Think it through
What could the pupil do, so that all five books can be used? What is the cost of doing it?
- Hint 1: Which book is not needed at the moment? Where could it go?
Show what happens
Move a book that is not needed right now from the desk to the locker, put the new one on the desk, and fetch the book from the locker again when it is needed. The cost is time: every trip to the locker is slower than reaching across the desk.
RAM has a limited size, and the programs and data a user opens can need more than it holds. Virtual memory is the solution. The operating system sets aside a space on the secondary storage (the hard disk drive or the solid-state drive) and uses it as if it were an extension of RAM. That is how virtual memory is created.
It is used in this way. Programs and data are divided into blocks of the same size called pages. When RAM is full, the operating system moves pages that are not being used at the moment out of RAM and into virtual memory, to make room, and copies them back into RAM when they are needed again. The CPU can only use pages that are in RAM.
Real RAM holds a very large number of pages, but it behaves in the same way when it is full.
RAM
Step 1 of 6: RAM is full
RAM holds four pages, A, B, C and D, from the programs that are open. There is no free space.
The user
Step 2 of 6: A new page is needed
The user opens a program that needs a fifth page, E. RAM has no room for it.
Operating system
Step 3 of 6: A page is moved out
The operating system picks a page that is not needed right now, say C, and copies it into virtual memory on the secondary storage.
Operating system
Step 4 of 6: The new page is loaded
Page E is loaded into the space that C used. RAM now holds A, B, D and E.
Operating system
Step 5 of 6: A page is brought back
Later the CPU needs C. The operating system moves another idle page out to virtual memory, and copies C back into RAM.
Secondary storage
Step 6 of 6: The cost is time
Everything still works, but each move is much slower than reading RAM, because secondary storage is much slower than RAM.
Check your understanding
Show the answer
Answer: B. Space on secondary storage used by the operating system as an extension of RAM.
Virtual memory is secondary storage used as an extension of RAM.
Check your understanding
Show the answer
Answer: C. Pages not needed at that moment are moved out, and brought back when they are needed.
Pages are swapped between RAM and virtual memory.
Stage: Apply
A laptop that slows to a crawl
Virtual memory is not extra RAM and it does not make a computer faster. It lets a computer cope with more than fits in RAM, at the price of speed: the more the operating system has to move pages in and out, the slower the computer feels.
Apply it
Show the answer
Answer: A. RAM is full, so pages are swapped to and from the drive as virtual memory, which is much slower.
Constant swapping of pages makes a computer slow.
Apply it
Show the answer
Answer: D. Adding more RAM, so that fewer pages need to be moved out.
More RAM means fewer pages to move.
Apply it
Show the answer
Answer: C. It is part of secondary storage, which is much slower than RAM.
Virtual memory gives size, not speed.
Stage: Consolidate
Show what you know
Think it through
Explain to a younger pupil, using the desk and the locker, why a computer needs both RAM and ROM, and what it does when RAM is full.
Show a model answer
A good answer covers both parts. For example: “RAM is like the desk: it holds what you are working on, and it is cleared when the power goes off. ROM is like the card stuck to the lid: it stays, and it tells the computer how to start. A computer needs the desk to work on, and the card to know how to begin. If the desk is full, the computer moves books that are not needed to the locker, which is virtual memory on the drive, and brings them back when needed. That works, but it is slower.”
Check your understanding
Show the answer
Answer: B. The CPU accesses primary storage directly; programs are copied from secondary storage into RAM before use.
The CPU works from primary storage.
- Primary storage is memory the CPU accesses directly: RAM and ROM. Secondary storage is not accessed directly, and keeps programs and files permanently.
- RAM holds the programs and data in use, can be read and written, and is volatile: it loses its contents when the power is off.
- ROM holds the start-up instructions, is read-only in normal use, and is non-volatile.
- A computer needs both: RAM for work that changes, and ROM so that it has instructions at switch-on.
- Virtual memory is space on secondary storage that the operating system sets aside and uses as an extension of RAM. Pages that are not needed are moved out of RAM, and brought back when they are.
- It is needed because RAM is limited. It is slower than RAM, so a computer that depends on it too much slows down.
Sources and scope
- What this lesson is. The sixth lesson of the Computer Systems module, written for this site. It teaches Cambridge IGCSE Computer Science (0478) points 3.3.1 and 3.3.4 (2026 to 2028, version 6): primary storage, RAM and ROM, and virtual memory. The other parts of point 3.3 are left to later lessons. Its curriculum links are provisional and imply no endorsement by any examination board. It has not been approved by the site owner.
- Original material. The pupil’s desk and locker, the four-page RAM, and the people named are fictional and were written for this lesson.
- Simplified on purpose. ROM is described as read-only in normal use; in many real computers the start-up instructions are kept in memory that can be rewritten by a special update, and the start-up sequence has more stages than the two named here. Paging is shown with four pages, and real operating systems use more careful rules to choose which pages to move. Secondary storage is only contrasted with primary storage here.
The part of a computer that carries out instructions: it fetches each instruction from memory, decodes it and executes it, processing data so that a result can be output.
The bus that carries data and instructions between the CPU and memory, in both directions.
A computer system built into a larger device to carry out one dedicated function, such as the controller inside a washing machine.
Memory that keeps its contents when the power is switched off.
Memory that the CPU can access directly, such as RAM and ROM.
The computer’s main working memory: it holds the programs and data in use, and can be both read and changed, but loses its contents when the power is switched off.
Memory whose contents are fixed in normal use and are kept when the power is off. It holds the instructions the computer needs in order to start up.
Storage that the CPU cannot access directly, used to keep programs and data permanently, such as a hard disk drive or a solid-state drive.
Space on secondary storage that the operating system uses as an extension of RAM, moving pages of data between the two as they are needed.
Memory that loses its contents when the power is switched off.
Your progress on this lesson
Saved in this browser only. It is not sent anywhere, does not follow you to another device, and is lost if you clear this site’s data.
This browser is not allowing the site to save progress, so it will be forgotten when you leave the page.