Study Guide Instructor view

Representing Sound

Teaching notes for Lesson 1.7, with controls for presenting it.

Keep this page on your own screen. Share only the lesson window. The lesson window holds no teaching notes, so sharing it cannot show them.

Presenting

  1. Open the lesson in its own window and share that window, not this one.
  2. Use Next and Previous here, or the lesson’s own, to move through the lesson. Next reveals one thing at a time: the next idea, or the answer to the question on screen, then the next step. Previous takes the last reveal back. The line below says what is on screen and what Next will show.
  3. Reveal hints and answers when the class is ready, and reset a demonstration before using it again.

The controls need JavaScript and a browser that supports BroadcastChannel. Without them, open the lesson in presentation mode and use its own controls.

The two windows talk to each other only inside this browser, on this device. Nothing is sent to a server, and no account is needed. A second device (a phone or another tablet) cannot follow the lesson window yet.

Lesson plan

Level
Intermediate
Time
About 55 minutes; the steps below add up to 55

Learners invent sampling themselves by recording a swing in a notebook, and only then meet the words analogue, digital, sample, sample rate and sample resolution. They encode six samples in 3 bits, predict the effect of measuring more often and more carefully, separate the two settings, and apply them to choosing recording settings and correcting a claim. File-size calculations are left to the next lesson, so the focus here is on what each setting means and what it does to quality and size.

Objectives

  • Explain the difference between analogue data and digital data
  • Describe how a sound wave is sampled and the samples stored as binary numbers
  • Define sample rate and sample resolution, and calculate the number of samples and of levels
  • Explain the effect of changing sample rate and sample resolution on the accuracy of a recording and on its file size
  • Choose sensible settings for a recording and justify them

Before the lesson

  • A picture or video of a playground swing, or ask learners to imagine one; no equipment is needed.
  • Squared paper or the board for plotting Kiran’s table of heights, so that learners can see ‘joining the dots’ become closer with more points.
  • Mini whiteboards for encoding levels in 3 bits and counting levels from bits.
  • Keep the words how often and how carefully visible throughout; they carry the whole lesson.

Steps

  1. Introduction Opening

    On screen: the lesson’s title, module and number; Next adds its objectives and key terms, as the lesson page lists them; Next again begins the first step.

    Objectives on screen

    • Explain the difference between analogue data and digital data
    • Describe how a sound wave is sampled and the samples stored as binary numbers
    • Define sample rate and sample resolution, and calculate the number of samples and of levels
    • Explain the effect of changing sample rate and sample resolution on the accuracy of a recording and on its file size
    • Choose sensible settings for a recording and justify them

    Purpose: Learners invent sampling themselves by recording a swing in a notebook, and only then meet the words analogue, digital, sample, sample rate and sample resolution. They encode six samples in 3 bits, predict the effect of measuring more often and more carefully, separate the two settings, and apply them to choosing recording settings and correcting a claim. File-size calculations are left to the next lesson, so the focus here is on what each setting means and what it does to quality and size.

  2. 1. Recording a swing with a notebook Think 5 min

    Purpose: Learners propose a way to record a smoothly changing quantity before the vocabulary is given.

    Ask

    • Kiran cannot write down every instant. How could she record the swing so that a friend can redraw it?
    • What would make the redrawing closer to the real swing?

    Responses to expect

    • Measure the height at regular times, such as once a second, and write the heights in a table
    • Measure more often, and measure each height more precisely

    Misconceptions to challenge

    • A learner may believe: “She could record every instant.” Respond: There are infinitely many instants, so she must choose moments. A table can only hold a limited list.
    • A learner may believe: “A single measurement at the highest point is enough.” Respond: One point does not show the movement. Ask what the friend could redraw from two or three points.

    On the board or with the pen

    • Draw a smooth swing curve and mark points at regular times with the pen, then join them with straight lines to show the approximation.

    Checking understanding: Pairs write their recording plan on a whiteboard; check for the two ideas: how often, how carefully.

    Depending on the answers

    • If learners only suggest ‘measure more’: ask them what ‘more’ could mean: more often, or more precisely.

    English as an additional language

    • Check swing, seat and smoothly; mime a swing and ask for heights.

    Discussion pause: Thirty seconds of silent thinking, then pairs agree a plan before sharing.

    In the lesson window

    • Think it through: Kiran cannot write down every instant. How could she record the movement so that her friend can redraw it? What would make the redrawing closer to the real swing?
  3. 2. Turning a wave into numbers Discover 6 min

    Purpose: Learners work out what must be done to a smooth signal to store it as whole numbers, then meet sample, sampling and analogue and digital.

    Ask

    • A computer stores only whole numbers in binary. What two things would you do to the signal?
    • Why can’t a computer store analogue data directly?

    Responses to expect

    • Measure the height at regular moments, and round each measurement to a stored level
    • An unending number of values cannot be stored, so the data has to be separate numbers

    Misconceptions to challenge

    • A learner may believe: “Digital data is better quality than analogue data.” Respond: Digital data is stored in separate values. It can follow the original closely, but it is a copy made of steps.
    • A learner may believe: “Sound is digital as it travels through the air.” Respond: Sound in the air is a smoothly changing wave: analogue. It becomes digital only after sampling.

    On the board or with the pen

    • Draw the four steps of the step-through in a row: microphone, sample, round, store, with one example number for each.

    What learners should notice

    • Each sample is rounded to the nearest level before it is stored in binary.

    Checking understanding: Ask learners to say the four steps from memory with a partner.

    Depending on the answers

    • If learners skip the rounding step: ask what to do with a measurement of 4.6 when only whole levels can be stored.

    English as an additional language

    • Check analogue, digital, sample and level; give one example of each.

    In the lesson window

    • Think it through: A microphone produces a smoothly changing signal. A computer stores only whole numbers in binary. Using Kiran’s idea, what two things would you do to the signal to turn it into whole numbers?
  4. 3. Encoding some samples Discover 9 min

    Purpose: Learners work out the levels and total bits for a short recording, then encode six samples in 3-bit binary.

    Ask

    • If each sample is stored in 3 bits, how many levels can the recorder store? How many bits will six samples take?
    • A recorder uses 4 bits for each of 10 samples. How many bits in total?

    Responses to expect

    • 2^3 = 8 levels, and 6 × 3 = 18 bits
    • 40 bits: 10 × 4

    Misconceptions to challenge

    • A learner may believe: “14 bits, because 10 + 4 = 14 (bits-for-recording option A).” Respond: Adding would not count the bits. Each of the 10 samples takes 4 bits: how many bits is that in all?
    • A learner may believe: “16 bits, because 4 bits make 16 levels (option C).” Respond: 16 is the number of levels, not the number of bits stored. How many samples are there, and how many bits does each take?
    • A learner may believe: “Leading zeros can be dropped in a 3-bit sample (level 0 is just 0).” Respond: Every sample takes exactly 3 bits, so level 0 is 000.

    On the board or with the pen

    • Write the six levels 2 5 7 5 2 0 and the binary 010 101 111 101 010 000 under them, then join them to give the 18-bit string.

    What learners should notice

    • The stored wave is a set of separate steps, not a smooth curve.

    Checking understanding: The bits-for-recording check separates adding from multiplying.

    Depending on the answers

    • If learners struggle with 3-bit patterns: go back to the columns 4, 2, 1 and encode 5 = 4 + 1 together.

    Support

    • Provide the columns 4 2 1 above three empty boxes.

    In the lesson window

    • Think it through: If each sample is stored in 3 bits, how many different levels can the recorder store? How many bits will six samples take in total?
    • Check your understanding: A recorder stores every sample in 4 bits. It takes 10 samples. How many bits does the recording take?
  5. 4. How often to measure Predict 9 min

    Purpose: Learners predict which friend’s table redraws the swing more closely, then name sample rate and hertz and test the effect of a higher rate.

    Ask

    • Mo measures 2 times a second and Zara 10 times a second for 4 seconds. Whose table will redraw the swing more closely, and how many heights does each table hold?
    • A recording is made again at a higher sample rate. What happens to it?

    Responses to expect

    • Zara’s, because there are more points to join; Mo has 8 heights and Zara 40
    • It follows the original more closely, and the file is bigger

    Misconceptions to challenge

    • A learner may believe: “A higher sample rate makes the sound louder (effect-of-higher-rate option C).” Respond: Sample rate is about how often the wave is measured, not how tall it is. What does taking more samples change?
    • A learner may believe: “A higher sample rate gives a better recording with the file staying the same size (option B).” Respond: More samples means more numbers to store. If each sample takes the same bits, what happens to the total?
    • A learner may believe: “Hertz measures how high the pitch is, so this is about the sound frequency.” Respond: Here hertz counts samples per second. The recording’s own pitch is a separate idea.

    On the board or with the pen

    • Plot Mo’s 8 points and Zara’s 40 on two copies of the same curve to compare how closely each follows it.

    What learners should notice

    • The number of samples is the sample rate multiplied by the length in seconds.

    Checking understanding: The count-samples table, and the effect-of-higher-rate check.

    Depending on the answers

    • If learners are confused about hertz: say 1 Hz is one sample per second and repeat with 100 Hz for 5 seconds.
    • If learners are secure: ask why a phone call can use 8000 Hz but a music CD uses 44 100 Hz (optional extension).

    English as an additional language

    • Check sample rate, hertz and second; use a clock to show one per second.

    In the lesson window

    • Think it through: Whose table will let you redraw the swing’s movement more closely, and whose table is longer? How many heights is each table likely to hold?
    • Check your understanding: A recording is made again at a higher sample rate, with everything else the same. What happens to it?
  6. 5. How carefully to measure Predict 9 min

    Purpose: Learners predict how carefully heights are measured and what a 2-bit sample can store, then name sample resolution and levels.

    Ask

    • Which measurement needs a bigger number: to the nearest metre or the nearest centimetre?
    • If only 2 bits are used for each sample, how many different heights can be stored?
    • A recorder changes from 8 bits to 4 bits for each sample at the same rate. What changes?

    Responses to expect

    • Centimetres: there are more possible values
    • 2^2 = 4 heights, so the redrawn swing would look stepped
    • Only 16 levels instead of 256, so samples are rounded more roughly, and the file is smaller

    Misconceptions to challenge

    • A learner may believe: “More samples each second, and the file is bigger (effect-of-lower-resolution option A).” Respond: The sample rate is the same, so the number of samples each second has not changed. What has changed about each sample?
    • A learner may believe: “The rounding is rougher but the file stays the same size (option B).” Respond: The rounding part is right. Each sample now takes 4 bits instead of 8: what does that do to the total number of bits?
    • A learner may believe: “Sample resolution means how clear the sound is when played back.” Respond: It is the number of bits for each sample, which sets the number of levels. Clarity is an effect of it.

    On the board or with the pen

    • Fill in the resolution table with learners (1, 2, 4, 8, 16 bits) and draw a sketch of the same wave at 2 bits and at 4 bits.

    What learners should notice

    • Each extra bit doubles the number of levels.

    Checking understanding: The levels table and the effect-of-lower-resolution check.

    Depending on the answers

    • If learners say 16 levels for 8 bits: ask them to double 2 for each bit up to eight.

    Support

    • Give the doubling sequence 2 4 8 16 32 64 128 256 on a card.

    Discussion pause: Silent prediction of the 2-bit levels before the reveal.

    In the lesson window

    • Think it through: Which measurement needs a bigger number to write down? If a computer used only 2 bits for each sample, how many different heights could it store?
    • Check your understanding: A recorder changes from 8 bits to 4 bits for each sample, with the same sample rate. What changes?
  7. 6. Two settings, two jobs Explain 6 min

    Purpose: Learners say in their own words how sample rate and sample resolution differ, and see that raising either doubles the size.

    Ask

    • How do sample rate and sample resolution differ? Use the swing to explain each.
    • Which of them is a count of bits?

    Responses to expect

    • Rate is how often the height is measured; resolution is how carefully each height is measured
    • Sample resolution

    Misconceptions to challenge

    • A learner may believe: “A higher sample rate makes the sound louder or higher in pitch.” Respond: It changes how closely the recording follows the original. Loudness and pitch belong to the sound, not the recording settings.
    • A learner may believe: “Sample rate and resolution are the same thing.” Respond: One counts samples per second, the other bits per sample. Raising either gives a bigger, more accurate file.

    On the board or with the pen

    • Draw two columns, how often and how precisely, and write rate and resolution with their units; add the 4000 × 8 × 10 working under both.

    Checking understanding: Ask learners to explain the difference to a partner with the swing, then hear two explanations.

    Depending on the answers

    • If learners mix the settings in the explanation: ask them which one is measured in hertz and which one in bits.

    English as an additional language

    • Provide the sentence frames: ‘Sample rate is how often … Sample resolution is how carefully …’.

    In the lesson window

    • Think it through: In your own words, how do sample rate and sample resolution differ? Use the swing to explain each, and say which of them is a count of bits.
  8. 7. Choose settings for a job Apply 8 min

    Purpose: Apply the two settings to choosing a recording mode, halving the rate, and correcting a claim that mixes them.

    Ask

    • A pupil records a spoken reminder and wants a small file. Which setting?
    • A recording at 16 000 samples a second is recorded again at 8000. What happens to the file size?
    • Tariq says raising the rate from 8000 Hz to 16 000 Hz gives each sample 16 bits. What is wrong?

    Responses to expect

    • Voice memo: speech stays clear at lower settings and the file is smaller
    • Half the size: half as many samples with the same bits each
    • Sample rate counts samples a second; the bits per sample come from the resolution

    Misconceptions to challenge

    • A learner may believe: “Studio music, because a higher setting is always better (recording-a-lesson option A).” Respond: A higher setting is more accurate but also much bigger. Does a spoken reminder need that accuracy?
    • A learner may believe: “A lower sample rate makes the recording louder (option C).” Respond: Sample rate does not change loudness. What does it change about the file?
    • A learner may believe: “A quarter of the size, because both numbers are halved (halve-the-rate option B).” Respond: Only the sample rate has been halved. How many of the numbers in the calculation changed?
    • A learner may believe: “Hertz and bits are the same measurement (tariqs-claim option B).” Respond: Hertz counts samples each second; bits count the size of each sample.

    Checking understanding: Three questions from three angles: choice with a reason, a size effect, and a mixed-up claim.

    Depending on the answers

    • If learners cannot decide the voice memo question: ask which of the two uses fewer bits in total and whether speech needs the extra detail.
    • If learners are secure: ask what happens if both settings are halved (a quarter).

    Stretch

    • Which setting would you reduce first to save space for a phone call, and which would you keep? Justify.

    In the lesson window

    • Apply it: A pupil records a spoken reminder to herself and wants the file to be as small as is sensible. Which setting should she choose, and why?
    • Apply it: A recording uses 16 000 samples a second at 8 bits each for 30 seconds. It is recorded again at 8000 samples a second, with everything else the same. What happens to the file size?
    • Apply it: Tariq says: “If I raise the sample rate from 8000 Hz to 16 000 Hz, each sample gets 16 bits.” What is wrong with this?
  9. 8. Bring it together Consolidate 3 min

    Purpose: Learners explain how a sound is stored and why settings change the roughness, and identify what is digital before the summary.

    Ask

    • Explain how a computer stores a sound, and why 10 samples a second at 2 bits sounds rougher than 10 000 a second at 16 bits.
    • Which of these is digital data?

    Responses to expect

    • Measure the wave at regular moments, round each to a level, store the level in binary; few points and few levels make a coarse copy
    • The list of binary numbers a recorder stores

    Misconceptions to challenge

    • A learner may believe: “The signal from a microphone is digital (what-is-digital option A).” Respond: The signal takes any value in a range, with no gaps. Is that separate values or continuous?
    • A learner may believe: “Sound waves in the air are digital (option B).” Respond: The air pressure changes smoothly and can take any value, so it is analogue.

    Checking understanding: Listen for both settings in the explanation: how often and how many bits.

    Depending on the answers

    • If learners cannot explain without prompts: open the next lesson by calculating the size of 10 samples at 2 bits.

    In the lesson window

    • Think it through: Without looking back, explain to a friend how a computer stores a sound, and why a recording sampled 10 times a second at 2 bits sounds rougher than one sampled 10 000 times a second at 16 bits.
    • Check your understanding: Which of these is digital data?
  10. Lesson recap Closing

    On screen: the lesson’s objectives again; Next adds the closing question, which asks the class to explain each one in their own words without looking back. It says nothing about what anyone has learnt: use the answers to decide what to revisit.

    Points to listen for

    • Analogue data varies smoothly and can take any value; digital data is separate values stored in binary.
    • To store a sound it is sampled: measured at regular intervals, each sample rounded to a level and stored as a binary number.
    • Sample rate is samples per second, in hertz. Sample resolution is the number of bits per sample; n bits give 2^n levels.
    • Raising either setting makes the recording more accurate and the file bigger; lowering either makes it less accurate and smaller.
    • The two settings are separate, and neither changes how loud the sound is.

Consolidation

  • Analogue data varies smoothly and can take any value; digital data is separate values stored in binary.
  • To store a sound it is sampled: measured at regular intervals, each sample rounded to a level and stored as a binary number.
  • Sample rate is samples per second, in hertz. Sample resolution is the number of bits per sample; n bits give 2^n levels.
  • Raising either setting makes the recording more accurate and the file bigger; lowering either makes it less accurate and smaller.
  • The two settings are separate, and neither changes how loud the sound is.