Study Guide

Robotics

What a robot is and what makes a machine one (a mechanical structure, electrical components and a program), where robots and drones are used in industry, transport, agriculture, medicine, the home and entertainment, and how to judge when using one is a good idea.

Lesson 3.12 Computer Systems

For: Cambridge IGCSE Computer Science learners

Stage: Think

Is it a robot?

Here are five machines (made up for this lesson). A wind-up toy duck that waddles when its key is turned. A toy car whose every move is made by a child pressing buttons on a controller. A welding arm in a car factory that follows a stored program. A laptop. A vacuum cleaner that moves round a room by itself, steering round chair legs.

Think it through

Which of the five would you call a robot, and which would you not? Say what you looked for.

Show a model answer

The welding arm and the vacuum cleaner are the clearest robots: each has a body that moves, it uses sensors, a microprocessor and motors, and it follows a program that can be changed. The wind-up duck moves, but it has no electronics and cannot be reprogrammed. The toy car is moved entirely by the child, with no program of its own. The laptop is programmable but has no body whose job is to carry out a physical task.

Robotics is the branch of computer science that includes the design, construction and operation of robots. A robot has three characteristics.

  • A mechanical structure or framework: a body, such as the arm, joints and gripper of a factory robot, or the wheels and case of a vacuum cleaner.
  • Electrical components: sensors to find out about the surroundings, a microprocessor to decide what to do, and actuators, usually motors, to make the body move.
  • It is programmable: its behaviour is controlled by a program that can be changed, so the same robot can be given a different job.

You will recognise the second characteristic from Lesson 11: a robot contains the sense, process and act loop of an automated system, and adds a body that carries out a physical task.

Which characteristic of a robot does each part of a factory welding arm show? Type mechanical, electrical or programmable.
Part of the welding armCharacteristic
The metal arm, its joints and its gripper
The motors that turn each joint
A stored set of instructions that can be replaced so that the arm welds a different car
A camera that checks where the next weld has to go
The frame that holds the arm in place on the factory floor
The microprocessor in the arm’s controller

    Show the completed table
    Part of the welding armCharacteristic
    The metal arm, its joints and its grippermechanical
    The motors that turn each jointelectrical
    A stored set of instructions that can be replaced so that the arm welds a different carprogrammable
    A camera that checks where the next weld has to goelectrical
    The frame that holds the arm in place on the factory floormechanical
    The microprocessor in the arm’s controllerelectrical

    Check your understanding

    A machine has wheels, a motor, a sensor and a microprocessor running a program that can be replaced. Which characteristics of a robot does it have?
    Show the answer

    Answer: C. All three: a mechanical structure, electrical components and being programmable.

    A robot has a body, electronics and a program.

    A robot does not have to look like a person. Most robots are arms, wheeled machines or flying machines, built for the shape of the job. What makes a machine a robot is the three characteristics, not its appearance.

    Stage: Discover

    Robots in the air and in the home

    A small flying machine (a made-up one) has four propellers, a camera and a small computer. It can be flown by a person using a controller, or it can follow a route stored in its memory by itself.

    Think it through

    If this machine is a robot, which parts would be its mechanical structure, its sensors, its microprocessor and its actuators?

    Show what happens

    Mechanical structure: its frame and the arms that hold the propellers. Actuators: the motors that spin the propellers. Sensors: the camera, a sensor that measures its position (GPS), and motion sensors that tell it when it is tilting. Microprocessor: the flight controller, which adjusts the motors many times a second to keep it level and on its route.

    A flying machine like this is a drone: an unmanned flying robot, usually with several propellers, that is flown by remote control or follows a programmed route. Drones show the three characteristics clearly.

    Robots in the home are called domestic robots. A robot vacuum cleaner uses sensors to find walls and steps, and a program to plan its path. A robot lawn mower does the same job outdoors.

    Do not confuse: Automated system and robot

    What is it?Automated system
    Sensors, a microprocessor and actuators carrying out a task by themselves, in any form.A thermostat, or the controller of a street light.
    What is it?Robot
    A programmable machine with a mechanical structure and the same electrical components, whose body carries out a physical task.A welding arm, a vacuum cleaner, a drone.

    Most robots are automated systems that have been given a body. Not every automated system has a body that works on the world, which is why not every one is called a robot.

    Check your understanding

    Why is a drone that follows a programmed route a robot?
    Show the answer

    Answer: B. It has a frame with motors, sensors and a microprocessor that runs a program that can be changed.

    A drone is a flying robot.

    Stage: Predict

    Where robots do the work

    Think it through

    Think about jobs that are dull and repeated thousands of times, jobs that are dangerous, and jobs that need great precision. Name two jobs, in different places such as a factory, a farm, a hospital or a home, that a robot might do.

    Show what happens

    For example: welding thousands of identical car bodies (dull and repetitive); picking fruit or milking cows on a farm (repeated and constant); helping a surgeon with delicate cuts (precise); vacuuming a floor (dull, at home); carrying a parcel to a house (a drone). Robots suit tasks that are repeated, dangerous or demand precision.

    Robots are used in many areas. These six are in the course:

    • Industry: factory equipment, such as arms that weld, paint and assemble products, and machines that move and sort goods in warehouses.
    • Transport: driverless vehicles and delivery robots, and drones used to move parcels.
    • Agriculture: machines that milk cows, pick fruit or plant seeds, and drones that fly over fields to spray crops or to check how they are growing.
    • Medicine: robot arms that help a surgeon to operate with very small, steady movements (the surgeon controls it), and robots that carry supplies or clean rooms in hospitals.
    • Domestic settings: robot vacuum cleaners and lawn mowers.
    • Entertainment: moving models of animals in theme parks, robot toys, and drones that film from the air in films and at concerts.
    In which area is each robot used? Type industry, transport, agriculture, medicine, domestic or entertainment.
    Robot and jobArea
    A robot arm that paints car bodies on an assembly line
    A drone that delivers a parcel to a house
    A machine that milks cows without a farmworker
    A robot arm that holds the instruments steady during an operation, controlled by the surgeon
    A robot that mows the lawn of a family’s garden
    A moving model of a dinosaur at a theme park
    A drone that flies over a field to spray the crop

      Show the completed table
      Robot and jobArea
      A robot arm that paints car bodies on an assembly lineindustry
      A drone that delivers a parcel to a housetransport
      A machine that milks cows without a farmworkeragriculture
      A robot arm that holds the instruments steady during an operation, controlled by the surgeonmedicine
      A robot that mows the lawn of a family’s gardendomestic
      A moving model of a dinosaur at a theme parkentertainment
      A drone that flies over a field to spray the cropagriculture

      Stage: Apply

      When is a robot worth it?

      A company makes 400,000 identical car doors a year, and each one needs the same 12 welds. It is considering welding robots instead of people. Here is how a judgement is reached.

      1. Say what the job needs. The same 12 welds, millions of times, exactly in the same places.
      2. Say what a robot does well at that job. It repeats the same movements exactly, never tires or loses concentration, works through the night, and keeps a worker out of the heat, sparks and fumes.
      3. Say what the costs and risks are. Robots are expensive to buy, install and program, need skilled people to look after them, and stop the line if they break down. Welders may lose their jobs.
      4. Weigh them using the numbers in the scenario. With 400,000 identical doors a year, the high cost is shared over a huge number of identical welds, and the safety gain is large.
      5. Give a conclusion. Use robots, and retrain the welders as the people who program and maintain them.

      The same weighing might give a different answer for a different job, as the next question shows.

      Apply it

      A small workshop makes about ten unique metal garden gates a year, each a different design and welded by hand. A salesperson says it should buy the same welding robot. Which judgement is best?
      Show the answer

      Answer: C. Do not buy it yet: with so few jobs, all different, the cost would not be repaid, and each needs reprogramming.

      Robots pay off for repeated tasks, not one-off ones.

      Apply it

      A strawberry farm is thinking of a robot that picks ripe fruit with a camera and a soft gripper. Which statement gives the most balanced advice?
      Show the answer

      Answer: C. It works through the night at a steady speed, but it costs a lot, may bruise or miss hidden berries, and needs checking.

      Balance the real advantages with the limits of this job.

      Apply it

      A hospital is considering a robot arm that holds the surgical instruments while a surgeon controls it from a console. Which is the most important advantage, and which the most important disadvantage?
      Show the answer

      Answer: B. Advantage: very small, steady movements. Disadvantage: high cost, staff training, and it cannot judge unexpected problems.

      The robot adds precision, not judgement.

      Apply it

      A council wants a drone with a camera to inspect the underside of a tall bridge, instead of workers hanging from ropes. Which is the best-justified plan?
      Show the answer

      Answer: A. Use the drone for the first survey, which is safer and quicker, then send people to check the places it flags.

      Use the robot for what it does best, and people for the rest.

      Stage: Explain

      Putting it together

      Think it through

      Look back over the robots in this lesson. Write down three advantages and three disadvantages that appeared again and again, in different areas.

      Show a model answer

      Advantages: they can work without tiredness or breaks, they repeat tasks exactly and precisely, they can work in dangerous or hard-to-reach places, and they free people from dull or risky jobs. Disadvantages: they are expensive to buy, install and look after; they need skilled people to program and maintain them; they cannot cope with the unexpected or use judgement; jobs may be lost; and a breakdown or a fault can stop work or cause harm.

      Apply it

      Priya says: “Robots will take every job, because they do everything better than people.” What is the best reply?
      Show the answer

      Answer: C. Robots suit repeated, precise or dangerous tasks, but they lack judgement and need people to program and supervise them.

      Neither “all jobs” nor “no jobs”: it depends on the task.

      Go deeper Where is the line between a robot and an automated system?

      A washing machine has a frame, motors, sensors and a microprocessor, and a program (so it has the same three characteristics), yet people do not usually call it a robot. The line is not exact. In practice, the word “robot” is used for machines whose moving body does a physical job in the world that a person might otherwise do, such as welding, vacuuming or flying a camera over a field, while a washing machine is usually called an embedded or automated system. For the IGCSE course, the three characteristics are the guide.

      Stage: Consolidate

      Show what you know

      Think it through

      A restaurant wants to buy a robot that carries plates from the kitchen to the tables on wheels, avoiding customers by using sensors. Write a judgement: say what the three characteristics of this robot would be, give an advantage and a disadvantage, and decide whether it is a good idea, with a condition.

      Show a model answer

      A good answer names the characteristics and weighs them. For example: “It would have a body with wheels and a tray (mechanical structure); sensors such as proximity sensors, a microprocessor to plan its route, and motors to drive the wheels (electrical components); and a program that could be changed when the layout moves (programmable). An advantage is that it can carry heavy plates all evening without getting tired, so that staff have more time with customers. A disadvantage is that it is expensive, and it cannot cope with a crowded or unexpected situation, such as a child running in front of it, as well as a person. I would buy it as an extra helper, provided that staff stay on hand and it stops when a sensor detects someone close.”

      Check your understanding

      Which list gives all three characteristics of a robot?
      Show the answer

      Answer: B. A mechanical structure, electrical components, and being programmable.

      Mechanical, electrical, programmable.

      • Robotics is the branch of computer science that includes the design, construction and operation of robots.
      • A robot has a mechanical structure (a body or framework), electrical components (sensors, a microprocessor and actuators) and is programmable. It does not have to look human.
      • A drone is an unmanned flying robot, flown by remote control or following a programmed route. Factory equipment and domestic robots are other examples.
      • Robots are used in industry, transport, agriculture, medicine, domestic settings and entertainment.
      • Advantages: they work without tiredness, repeat tasks exactly, and can work where people cannot or should not. Disadvantages: they cost a lot, need skilled people, cannot use judgement or cope with the unexpected, and a fault can stop work or cause harm.
      • A good judgement uses the facts of the scenario: robots pay off for repeated, precise or dangerous tasks, and people are still needed for the rest.

      Sources and scope

      • What this lesson is. The twelfth lesson of the Computer Systems module, written for this site. It teaches Cambridge IGCSE Computer Science (0478) point 6.2 (2026 to 2028, version 6): robotics, the characteristics of a robot, its roles, and the advantages and disadvantages of using one. Its curriculum links are provisional and imply no endorsement by any examination board. It has not been approved by the site owner.
      • Original material. The five machines in the first step, the flying machine, the car door company, the garden gate workshop, the strawberry farm, the hospital, the bridge, the restaurant and the people named are fictional and were written for this lesson.
      • Simplified on purpose. The boundary between a robot and an automated system is not exact, and the lesson follows the three characteristics given in the course. Robots that learn from data and act on their own judgement belong to artificial intelligence, which is taught separately. Surgical robots in real hospitals are controlled by the surgeon, as described, and the advantages and disadvantages here are typical points, not a medical assessment.