Study Guide Instructor view
Sensors
Teaching notes for Lesson 3.5, with controls for presenting it.
Keep this page on your own screen. Share only the lesson window. The lesson window holds no teaching notes, so sharing it cannot show them.
Presenting
- Open the lesson in its own window and share that window, not this one.
- Use Next and Previous here, or the lesson’s own, to move through the lesson. Next reveals one thing at a time: the next idea, or the answer to the question on screen, then the next step. Previous takes the last reveal back. The line below says what is on screen and what Next will show.
- Reveal hints and answers when the class is ready, and reset a demonstration before using it again.
The controls need JavaScript and a browser that supports BroadcastChannel. Without them, open the lesson in presentation mode and use its own controls.
The two windows talk to each other only inside this browser, on this device. Nothing is sent to a server, and no account is needed. A second device (a phone or another tablet) cannot follow the lesson window yet.
Now on the lesson window
- On screen
- Next teaching point
Guidance for this point
Lesson plan
- Level
- Intermediate
- Time
- About 75 minutes; the steps below add up to 75
Pupils start from a greenhouse nobody is looking after and work out what the computer would have to know, then how a reading becomes an action in a loop, before the fourteen sensors are met in three groups (air, water and soil, movement and sound). They choose sensors for new jobs by asking what actually changes. The lesson ends with a design task and a correct-description question, so you can see whether pupils think sensor, computer, actuator in the right order or merely recall sensor names.
Objectives
- Explain what a sensor is and why computer systems use sensors
- State what each of the fourteen sensors in the IGCSE specification measures, and give a use for each
- Describe how a computer uses a sensor’s readings to control an actuator
- Tell apart sensors that are easily confused, such as humidity and moisture, or level and flow
- Choose the most suitable sensor for a given context, and justify the choice
Before the lesson
- Draw the made-up greenhouse on the board: a roof vent with a motor, a temperature sensor, a computer, and an arrow loop from sensor to computer to motor and back.
- Mini whiteboards for predictions.
- Three sorting trays or sheets labelled air, water and soil, and movement and sound, for the sensor groups.
- Optionally bring a phone to show the screen turning when tilted, which links to the accelerometer and proximity sensors.
Steps
Introduction Opening
On the lesson window now
On screen: the lesson’s title, module and number; Next adds its objectives and key terms, as the lesson page lists them; Next again begins the first step.
Objectives on screen
- Explain what a sensor is and why computer systems use sensors
- State what each of the fourteen sensors in the IGCSE specification measures, and give a use for each
- Describe how a computer uses a sensor’s readings to control an actuator
- Tell apart sensors that are easily confused, such as humidity and moisture, or level and flow
- Choose the most suitable sensor for a given context, and justify the choice
Purpose: Pupils start from a greenhouse nobody is looking after and work out what the computer would have to know, then how a reading becomes an action in a loop, before the fourteen sensors are met in three groups (air, water and soil, movement and sound). They choose sensors for new jobs by asking what actually changes. The lesson ends with a design task and a correct-description question, so you can see whether pupils think sensor, computer, actuator in the right order or merely recall sensor names.
1. Looking after a greenhouse at the weekend Think 8 min
On the lesson window now
Purpose: Pupils work out what a computer would need to know to look after a greenhouse alone, so that a sensor is met as the thing that measures and reports.
Ask
- What would the computer need to know about the greenhouse?
- How could it find out when nobody is there?
- Is the sensor the part that decides what to do?
Responses to expect
- The air temperature, how damp the soil is and how much light there is
- Something must measure these and send the readings
- No: the sensor measures and the computer decides
Misconceptions to challenge
- A learner may believe: “The sensor decides what the computer should do.” Respond: The sensor only measures and reports. Ask which part compares the reading with a limit.
- A learner may believe: “A sensor is an output device that moves something.” Respond: That describes an actuator. Ask whether a sensor acts on the world or measures it.
- A learner may believe: “A sensor is a program.” Respond: A program is software; a sensor is hardware that sends the computer a reading.
On the board or with the pen
- Write temperature, soil moisture and light in a list and draw an arrow from each to a box labelled computer.
What learners should notice
- The computer cannot ‘feel’ the air; it only knows what it is sent.
- A sensor is an input device.
Checking understanding: Pupils write three things the computer needs on mini whiteboards; the what-is-a-sensor check shows who has separated sensor, actuator and program.
Depending on the answers
- If pupils choose the actuator option: ask whether a sensor acts on the world or measures it, then re-ask.
- If lists are complete: ask which of the three would matter most overnight.
English as an additional language
- Check measure, reading and greenhouse; show a thermometer as a simple sensor.
Discussion pause: Thirty seconds of silent thinking, then pairs list three things.
In the lesson window
- Think it through: What would the computer need to know about the greenhouse in order to look after it, and how could it find these things out when nobody is there?
- Check your understanding: Which statement describes a sensor?
2. From a reading to an action Predict 12 min
On the lesson window now
Purpose: Pupils predict what the computer does with a reading of 31 °C and why the sensor must keep measuring, so that control is understood as a loop.
Ask
- The sensor reports 31 °C and the limit is 28: what should the computer do?
- How will it know when to stop?
- What is the difference between monitoring and controlling?
Responses to expect
- Compare the reading with the limit and open the vent
- The sensor keeps measuring so it can see the temperature fall
- Monitoring records or displays; controlling also makes something happen
Misconceptions to challenge
- A learner may believe: “The vent stays open for the rest of the day once opened.” Respond: If it did, the tomatoes might get too cold. Ask what the computer needs to know to close it.
- A learner may believe: “A sensor cannot be switched off once it has started.” Respond: It can be switched off. Ask what the computer uses its readings for.
- A learner may believe: “The sensor opens the vent directly.” Respond: The computer decides and signals the actuator. Ask which part compares 31 with 28.
On the board or with the pen
- Draw the loop with four arrows: measure, compare, act, measure again; write 31 and 28 on the compare arrow.
What learners should notice
- The loop is measure, compare, act, measure again.
- Each action changes what the sensor measures next.
Checking understanding: The why-keep-measuring check; ask pupils to name which part of the loop each wrong option confuses.
Depending on the answers
- If pupils choose the ‘lock open’ option: ask what would happen at night and what the computer would need to see to close the vent.
- If answers are secure: ask them to describe the loop for a heater that must keep a fish tank at 24 °C.
Support
- Give the four loop stages as cards to put in order before the StepThrough.
English as an additional language
- Teach compare, limit and loop with the vent diagram.
Discussion pause: Pairs decide what happens after the vent opens, before the StepThrough.
In the lesson window
- Think it through: The sensor reports 31 °C. What should the computer do? How will it know when to stop?
- Check your understanding: After the vent has opened, why does the sensor keep measuring?
3. Sensors for the air Discover 10 min
On the lesson window now
Purpose: Pupils suggest what a sensor could measure in the air before the five air sensors are named, then match each system to its sensor.
Ask
- What four things about the air could a sensor measure?
- Which sensor does each system need: lights at dusk, a fan, a barometer, a smoke alarm?
- How does a gas sensor differ from a humidity sensor?
Responses to expect
- How hot, how damp, how bright, how hard it presses, whether a gas is present
- Light, temperature, pressure, gas
- Gas detects a particular gas; humidity measures water vapour
Misconceptions to challenge
- A learner may believe: “A light sensor for dusk lights measures temperature.” Respond: Ask what actually changes at dusk.
- A learner may believe: “Pressure is about how hard the fuel or air pushes in a tank, so it can measure amount.” Respond: Air pressure measures force on an area, which is a weather measure, not the amount in a container.
On the board or with the pen
- Make a table of the five air sensors with a one-word example of use, filled in as pupils answer.
What learners should notice
- Each sensor measures one thing.
- The question to ask is: what changes?
Checking understanding: The air-sensors table: ask pupils to say the clue in each row that told them the sensor.
Depending on the answers
- If pupils confuse humidity and gas: ask whether the system cares about water in the air or a harmful gas such as carbon monoxide.
- If the table is quick: ask for a new use for each of the five.
English as an additional language
- Check humidity, pressure and gas; show each in a picture of a real device.
In the lesson window
- Think it through: A school weather station and a carbon monoxide alarm both measure the air. Suggest four different things about the air that a sensor could measure.
4. Sensors for water and soil Think 12 min
On the lesson window now
Purpose: Pupils work out what a computer would need to know about water and soil, then separate level from flow and humidity from moisture.
Ask
- What might a computer need to know about the fish tank water and the vegetable bed soil?
- Which sensor tells it the tank is nearly full?
- Why is a humidity sensor the wrong choice for the vegetable bed?
Responses to expect
- How high the water is, how fast it flows, how acidic it is, how wet the soil is
- A level sensor, because it measures how high the water reaches
- It measures water vapour in the air; the bed needs a moisture sensor
Misconceptions to challenge
- A learner may believe: “A flow sensor tells you a tank is nearly full because water is moving in.” Respond: Flow tells how fast; level tells how high. Ask which one the question is about.
- A learner may believe: “A humidity sensor can measure soil.” Respond: Humidity is about the air; moisture is about soil or another material.
- A learner may believe: “A pH sensor is for any water test.” Respond: pH measures acidity or alkalinity only; it cannot tell how full the tank is.
- A learner may believe: “A humidity sensor can only be used indoors.” Respond: Humidity sensors work outdoors too; the issue is that they measure the air, not the soil.
On the board or with the pen
- Split the board into water and soil and add level, flow, pH and moisture with a one-word note on each.
What learners should notice
- Level and flow are both about water but measure different things.
- Humidity and moisture sound alike but measure different things.
Checking understanding: The tank-overflow check and soil-sensor question; ask pupils to rewrite each wrong option’s sensor in terms of what it really measures.
Depending on the answers
- If pupils choose flow for the tank: ask how a tank could be nearly full when no water is moving.
- If answers are secure: ask which sensor would be needed to warn that a fish tank is too acidic.
Support
- Provide a table of the four sensors with the word measures and ask pupils to fill each in.
English as an additional language
- Check humidity, moisture, level and flow; pair each with a drawing.
In the lesson window
- Think it through: A computer looks after a school fish tank and a vegetable bed. What might it need to know about the water, and about the soil?
- Check your understanding: A computer must switch off a pump before a water tank overflows. Which sensor tells it that the tank is nearly full?
- Apply it: A school wants a computer to water a vegetable bed automatically when the soil is dry. Sam suggests a humidity sensor. What is the problem with that suggestion?
5. Sensors for movement, nearness and sound Discover 10 min
On the lesson window now
Purpose: Pupils infer what a phone senses when it turns its picture or switches off at the ear, so accelerometer and proximity sensors are met as answers to a puzzle.
Ask
- What might a phone be sensing when it turns its picture sideways?
- What might it sense when held to your ear?
- Which sensor notices a person by the heat their body gives off?
Responses to expect
- Tilt and movement
- Something very close
- An infra-red sensor
Misconceptions to challenge
- A learner may believe: “An acoustic sensor would notice body heat.” Respond: Acoustic measures sound. Ask what a person gives off that is not sound.
- A learner may believe: “A magnetic field sensor detects heat.” Respond: It detects a magnet or field. Ask what a person’s body gives off.
- A learner may believe: “Movement and nearness are measured by the same sensor.” Respond: An accelerometer measures acceleration; a proximity sensor measures how near something is.
On the board or with the pen
- Make a third table of the movement, nearness and sound sensors with a one-word use.
What learners should notice
- Several sensors sit in the same phone.
- Infra-red sensors can detect heat from bodies or broken light beams.
Checking understanding: The alarm-heat check with three options; ask pupils to explain each wrong sensor in terms of what it does measure.
Depending on the answers
- If pupils pick acoustic: ask which sensor would detect a silent person, and what they give off.
English as an additional language
- Check acceleration, proximity and infra-red; use the phone to show each.
In the lesson window
- Think it through: A phone turns its picture sideways when you turn it, and switches its screen off when you hold it to your ear. What might it be sensing in each case?
- Check your understanding: A burglar alarm in a room must notice a person by the heat their body gives off. Which sensor does this?
6. Choosing the most suitable sensor Apply 14 min
On the lesson window now
Purpose: Pupils see a worked example of choosing a sensor by reasoning, then do it themselves for new jobs and a mistaken claim.
Ask
- What must the computer know in this job, and which sensor measures it?
- Which sensor for a fuel gauge, and why not pressure or gas?
- Is Ayesha right that the door alarm needs an infra-red sensor?
Responses to expect
- Decide what changes, then pick the sensor that measures that
- A level sensor, because it measures how high the fuel is
- Not necessarily: a magnet and a magnetic field sensor also show the door opening
Misconceptions to challenge
- A learner may believe: “Pressure measures how much fuel there is.” Respond: Pressure measures force on an area, which is not the same as the amount; ask which property gives the amount as a height.
- A learner may believe: “No sensor is needed because a computer knows when a door opens.” Respond: A computer only knows what it is told. Ask what could tell it the door has moved.
- A learner may believe: “A pH sensor measures change in a door.” Respond: pH measures acidity, which has nothing to do with a door.
- A learner may believe: “Only one sensor can suit a job.” Respond: Several might work; the most suitable measures the event directly.
On the board or with the pen
- Write the worked example’s three steps (what must it know, which property changes, which sensor measures it) and use them for each question.
What learners should notice
- Each choice starts with the question what changes, not which sensor is familiar.
- Ayesha’s claim is partly reasonable, which is why the correct reply starts ‘Not necessarily’.
Checking understanding: The choose-sensors table and show-me answers on fuel-gauge and ayesha-door; ask one pupil to argue a wrong option to its limit.
Depending on the answers
- If pupils choose pressure for the fuel gauge: ask what a driver wants to know and which property of the liquid shows it.
- If the table is complete quickly: add a new job and ask pupils to justify two possible sensors and pick the better.
Support
- Provide the fourteen sensor names with a one-word measure each to refer to during the table.
Stretch
- A museum wants to know when a painting is moved. Suggest two sensors, say what each would measure and say which is more reliable.
English as an additional language
- Offer the sentence frame: It must know ___, so it needs a ___ sensor.
Discussion pause: Ask pupils to choose before discussing, to avoid the first answer steering the class.
In the lesson window
- Apply it: A car’s computer has to tell the driver how much fuel is in the tank. Which sensor is the most suitable?
- Apply it: Ayesha says: “A shop’s door alarm needs an infra-red sensor, because a door opening is a movement.” Which reply is the most accurate?
7. Show what you know Consolidate 9 min
On the lesson window now
Purpose: Pupils design a small system with three sensors and check the order sensor, computer, actuator, which shows whether they understand the roles and not only the sensor names.
Ask
- Choose three sensors for a fish tank, say what each measures and what the computer could do with the reading.
- Which description of the classroom fan system is correct?
Responses to expect
- Temperature to a heater, level to a valve, pH to an alert, each with a reading and an action
- A temperature sensor sends readings to the computer, which compares them with a limit and signals the fan
Misconceptions to challenge
- A learner may believe: “The fan measures the temperature.” Respond: A fan moves air; it does not measure anything. Ask which part measures and which part acts.
- A learner may believe: “The computer measures the temperature itself.” Respond: The computer has no way of feeling the air; the sensor tells it.
- A learner may believe: “The sensor switches the fan on directly.” Respond: The computer makes the decision, comparing the reading with a limit.
On the board or with the pen
- Draw the final system as sensor, computer, actuator in a loop, and write pupils’ fish-tank examples around it.
Checking understanding: Collect designs; check each sensor is matched to a property it measures and an action the computer takes.
Depending on the answers
- If designs name sensors without actions: ask what the computer would do when the reading is too high and when it is too low.
- If designs are strong: ask what could go wrong if a sensor failed, preparing for the automated systems lesson.
Support
- Offer a table with three rows: sensor, what it measures, what the computer does.
English as an additional language
- Allow a labelled diagram first; add one sentence for each sensor.
Discussion pause: Two minutes of silent planning before pairs compare.
In the lesson window
- Think it through: A school wants a computer to look after its fish tank. Choose three different sensors from this lesson that it could use. For each, say what it measures and what the computer could do with the reading.
- Apply it: A computer controls a ventilation fan in a classroom. Which description of how the system works is correct?
Lesson recap Closing
On the lesson window now
On screen: the lesson’s objectives again; Next adds the closing question, which asks the class to explain each one in their own words without looking back. It says nothing about what anyone has learnt: use the answers to decide what to revisit.
Points to listen for
- Ask pupils to name the three parts of a control system in order (sensor, computer, actuator) and give a sensor and an actuator for the greenhouse.
- Take one mistaken option (for example humidity for soil) and ask pupils to explain why it is plausible and why it is wrong.
- Look ahead: automated systems use sensors, microprocessors and actuators, so ask pupils to think of a place at school that already works without a person.
- Ask pupils to pick any three of the fourteen sensors and write one job for each.
Consolidation
- Ask pupils to name the three parts of a control system in order (sensor, computer, actuator) and give a sensor and an actuator for the greenhouse.
- Take one mistaken option (for example humidity for soil) and ask pupils to explain why it is plausible and why it is wrong.
- Look ahead: automated systems use sensors, microprocessors and actuators, so ask pupils to think of a place at school that already works without a person.
- Ask pupils to pick any three of the fourteen sensors and write one job for each.